| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: megaraid_sas: Limit NVMe request size to the PRP chain frame
megasas_make_prp_nvme() builds a command's PRP list in cmd->sg_frame, a
DMA pool buffer of instance->max_chain_frame_sz bytes, spending one
entry per NVMe page of the transfer plus one per page of the buffer for
the chain pointer. The loop runs until the transfer is described and
never checks the buffer bound.
max_hw_sectors comes straight from the MDTS the firmware reports for the
drive. On drives with a large MDTS the only thing keeping the list
inside the buffer was the block layer default of 1280 KiB, which needs
320 entries, which fit into a 4 KiB frame as that holds 512. But since
commit 9b8b84879d4a ("block: Increase BLK_DEF_MAX_SECTORS_CAP") that
default is 4 MiB, and such a transfer needs 1025 entries, so the list
runs a full page past the end of the frame:
sd 1:0:1:0: [sdb] tag#630 page boundary ptr_sgl: 0x00000000ba62d13f
BUG: unable to handle page fault for address: ff663bcb81e7c000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
RIP: 0010:megasas_build_and_issue_cmd_fusion+0xeaa/0x1870 [megaraid_sas]
If the page after the frame happens to be mapped, the overrun does not
fault but silently corrupts the neighbouring pool entry, which is
another in-flight command's PRP list.
Cap max_hw_sectors at what the chain frame can describe, less one page
for transfers that do not start on a page boundary and so need one entry
more. This is the megaraid_sas counterpart of commit 04631f55afc5
("scsi: mpt3sas: Limit NVMe request size to 2 MiB"), but derives the
limit from max_chain_frame_sz rather than hardcoding it. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: bsg: Cap io_uring sense copy to max_response_len
Completion copied scmd->sense_len to the user response buffer without
honoring max_response_len. After a valid sense, the midlayer sets
sense_len to the real length (up to SCSI_SENSE_BUFFERSIZE), so a smaller
user buffer was overrun. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read in rtw_action_frame_parse()
rtw_action_frame_parse() takes a frame_len parameter but never
actually checks it before indexing into the frame body:
const u8 *frame_body = frame + sizeof(struct ieee80211_hdr_3addr);
...
c = frame_body[0];
...
a = frame_body[1];
frame_body already points 24 bytes (sizeof(struct
ieee80211_hdr_3addr)) into frame, so reading frame_body[0] and
frame_body[1] requires frame_len >= 26. A management action frame
shorter than that (e.g. exactly 24 bytes, the minimum a malicious
peer can send) causes a 1-2 byte out-of-bounds read.
This is reachable from rtw_cfg80211_monitor_if_xmit_entry() and
cfg80211_rtw_mgmt_tx() in ioctl_cfg80211.c, both of which pass
attacker/user-influenced frame buffers and lengths straight through.
Add the missing length check before frame_body is dereferenced. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix OOB read / stack overflow in rtw_get_wps_attr()
rtw_get_wps_attr() walks WPS attributes inside a WPS IE taken from
a wireless management frame. For each candidate attribute it only
checks that the fixed 4-byte attribute header (2-byte ID + 2-byte
length) fits inside the IE:
if (attr_ptr + 4 > wps_ie + wps_ielen)
break;
u16 attr_id = get_unaligned_be16(attr_ptr);
u16 attr_data_len = get_unaligned_be16(attr_ptr + 2);
u16 attr_len = attr_data_len + 4;
attr_data_len (and therefore attr_len) is read directly from the
wire and is never checked against the remaining bytes in the IE
before being used as the size of:
memcpy(buf_attr, attr_ptr, attr_len);
Since attr_len is fully attacker controlled (0 to 65535+4), this is
both a heap OOB read of wps_ie, and, more seriously, a stack buffer
overflow at several call sites where buf_attr is a single-byte
stack variable, e.g. rtw_get_wps_attr_content()'s callers passing
WPS_ATTR_SELECTED_REGISTRAR into a stack "u8 sr"/"u8
selected_registrar" (drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c,
drivers/staging/rtl8723bs/core/rtw_mlme_ext.c). A crafted WPS IE in a
beacon or probe response processed during scanning can therefore
smash the stack of the parsing thread.
rtw_get_wps_attr_content() itself has no independent length check
and simply trusts the attr_len it gets back from rtw_get_wps_attr(),
so fixing the bound here also fixes that caller.
The "attr_ptr + 4 > wps_ie + wps_ielen" header check above was added
by commit 1463ca3ec6601 ("staging: rtl8723bs: fix OOB reads in
rtw_get_sec_ie(), rtw_get_wapi_ie(), and rtw_get_wps_attr()"), which
bounded the fixed header but never extended the check to cover the
variable-length attribute data that follows it. Add that missing
check before attr_len is used as a memcpy() length or accepted as a
match. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_midi2: fix use-after-free in string attribute show path
f_midi2_opts_str_show() takes the string lock internally, but its
callers dereference the opts->info.<field> pointer before calling it,
outside the lock. This races with f_midi2_opts_str_store(), which
frees the old string under opts->lock when the attribute is written
concurrently, the show path can read a pointer that gets freed
before the lock inside str_show() is even taken.
Change f_midi2_opts_str_show() to take a pointer to the string field,
matching the existing pattern in f_midi2_opts_str_store(), and
dereference it only after the lock is held. Update all three callers
(iface_name, block name, and the EP string option macro) accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_mass_storage: fix null pointer dereference in fsg_common_set_num_buffers()
Previously fsg_num_buffers_validate() was removed as it was not
necessary due to Kconfig setting the limits for n from 2 to 256 with
default as 2. However, setting the page content in such a way that
kstrtou8() reflects n value as either 0 or 1 bypasses these
restrictions leading to a null pointer dereference if n is 0. Fix
this by adding a check for n < 2 and returning -EINVAL if n is
either 0 or 1 consistent with Kconfig logic. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: qcom-pmic: cancel reset_work on stop
pdphy_stop() disables IRQs but leaves reset_work pending. If the IRQ
handler schedules it just before disable_irq(), the work runs after
remove() frees the struct via devm.
Call cancel_work_sync() after disabling IRQs to close the window.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
usb-storage: ene_ub6250: fix race between scan work and probe
ene_ub6250_probe() calls usb_stor_probe2(), which starts the usb-storage
infrastructure and schedules the delayed scan work. The driver then
calls ene_get_card_type(), which sends an ENE command through
ene_send_scsi_cmd() and the usb-storage bulk transfer helpers.
Both the delayed scan work, through usb_stor_Bulk_max_lun(), and
ene_get_card_type() use us->current_urb. The scan work serializes this
access with us->dev_mutex, but the ENE card-type probe does not. If the
scan work runs while ene_get_card_type() is still using us->current_urb,
usb_submit_urb() warns that the URB is already active.
Serialize ene_get_card_type() with us->dev_mutex, matching the locking
used by the scan path. |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not reject @Builder annotations whose builderStrategy member names an arbitrary class, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to execute code outside the sandbox if a suitable class is present on the classpath of the component that evaluates the script. |
| Graylog through 7.1.4 validates outbound URLs against an allowlist before making requests but fails to re-validate after following HTTP redirects. Attackers with lookup table or event notification permissions can craft allowlisted endpoints that redirect to internal services, enabling the server to fetch and return internal responses. |
| OpenSign through 2.41.3 fails to validate caller identity in the getDocument cloud function when one-time-password verification is disabled. Attackers can supply a document identifier from guest signing links to retrieve complete document details including all signers' information, sender identity, and valid download tokens without authentication. |
| changedetection.io through 0.60.6 fails to escape the scraped page title in HTML notifications, allowing arbitrary markup injection. Attackers can place malicious markup in monitored page titles that reaches notification channels like email and Telegram as live content when the watch_title token is used in templates. |
| The Autopay WordPress plugin before 5.0.1 does not enforce the signature on one of its payment callbacks, allowing unauthenticated users to disclose and delete the stored payment parameters of other customers' orders. |
| In the Linux kernel, the following vulnerability has been resolved:
media: usbtv: keep device alive while ALSA card exists
The ALSA PCM callbacks store the driver state in pcm->private_data. An
open PCM file can outlive USB disconnect because usbtv_audio_free() uses
snd_card_free_when_closed(). The disconnect path can then drop the V4L2
device reference and free struct usbtv before ALSA releases the substream,
so a later close dereferences freed memory in snd_usbtv_pcm_close().
Take a V4L2 device reference for the ALSA card and drop it from the card
private_free callback. This keeps struct usbtv valid until ALSA has closed
the remaining files and freed the card. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix OOB write in snd_usbmidi_us122l_output()
The snd_usbmidi_us122l_output() picks a count of 2 on anything slower
than high speed and never relates it to ep->max_transfer. The URB
buffer holds exactly max_transfer bytes, so a device declaring a one
byte bulk endpoint takes two bytes from snd_rawmidi_transmit(), and the
memset that pads the rest computes 1 - 2 in int and wraps to SIZE_MAX.
Only 0x800e and 0x800f are pinned to nine bytes. The US-122MKII at
0x0644:0x8021 falls to the default and takes usb_maxpacket(), which the
USB core only clamps downward.
The akai and novation output ops in this file were given the same guard
recently. Do the same here. |
| In Eclipse Ankaios versions 0.6.0 to before 1.0.4, `LogRule::matches` in the agent control-interface authorizer stops at the first wildcard pattern in a single rule instead of evaluating later entries, which can cause deny `LogRule` entries to be skipped and allow unauthorized access to another workload's logs. |
| Improper input validation in Snowflake CLI versions prior to 3.27.0 allowed unsanitized user-controlled values to be interpolated into SQL strings that are executed as multi-statement queries. An attacker who is able to supply a malicious project configuration file or craft command-line input can cause Snowflake CLI to execute attacker-controlled SQL statements in the context of the victim's Snowflake session and active role. Successful exploitation requires either write or pull-request access to a project repository whose CI/CD pipeline runs Snowflake CLI under an elevated service account role, or the ability to supply untrusted input to CLI-wrapping automation. Impact is limited by the privileges held by the configured Snowflake role at execution time. The fix is available in Snowflake CLI version 3.27.0, which also addresses several additional security findings. Users must manually upgrade. |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier checks the operations Groovy will perform with the elements it reads from a collection that a sandboxed script casts to another type but performs the cast on the collection itself, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute arbitrary code in the context of the Jenkins controller JVM. |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not reject the @GroovyASTTransformationClass annotation, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to run an arbitrary AST transformation at compile time, bypassing the sandbox protection and executing arbitrary code in the context of the Jenkins controller JVM. |
| Jenkins Script Security Plugin 1415.v9a_f9b_3a_c253d and earlier does not check calls from sandboxed scripts to methods added dynamically to a class at runtime, allowing attackers with permission to define and run sandboxed scripts, including Pipelines, to bypass the sandbox protection and execute code outside the sandbox. |
