| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix null ptr deref in hci_abort_conn()
hci_abort_conn() read hci_skb_event(hdev->sent_cmd) when a connection
was pending, but hdev->sent_cmd can be NULL while req_status is still
HCI_REQ_PEND, leading to a NULL pointer dereference and a general
protection fault from the hci_rx_work() receive path.
Instead of inspecting hdev->sent_cmd, track the in-flight create
connection command with a new per-connection HCI_CONN_CREATE flag and
route all cancellation through hci_cancel_connect_sync(), which
dispatches to a dedicated per-type cancel function. The create command
is in exactly one of two states: still queued, or in flight. The cancel
function holds cmd_sync_work_lock across the whole decision: the worker
takes this lock to dequeue every entry, so while it is held a queued
command cannot start running and an in-flight command cannot complete
and let the next command become pending. This keeps the flag test and
hci_cmd_sync_cancel() atomic with respect to the worker, so a queued
command is simply dequeued, and an in-flight command owned by this
connection is cancelled without the risk of cancelling an unrelated
command that became pending in the meantime. CIS uses the same flag
mechanism via HCI_CONN_CREATE_CIS but cannot be dequeued per-connection.
hci_acl_create_conn_sync() and hci_le_create_conn_sync() clear
HCI_CONN_CREATE after the create command completes, but the command
status handler can free conn via hci_conn_del() (for example when the
controller rejects the connection) while the worker is still blocked on
the connection complete event. Hold a reference on conn across the
create command so the flag can be cleared without a use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix UAF in bt_accept_dequeue()
bt_accept_get() takes a temporary reference before dropping the accept
queue lock. bt_accept_dequeue() currently drops that reference before
bt_accept_unlink(), leaving only the queue reference.
bt_accept_unlink() drops the queue reference. The subsequent
sock_hold() therefore accesses freed memory if it was the final
reference, as observed by KASAN during listening L2CAP socket cleanup.
Retain the temporary queue-walk reference through unlink and hand it to
the caller on success. Drop it explicitly on the closed and
not-yet-connected paths. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btnxpuart: Fix out-of-bounds firmware read in nxp_recv_fw_req_v3()
During the v3 firmware download the controller sends a v3_data_req with a
32 bit offset and a 16 bit len. nxp_recv_fw_req_v3() checks only the lower
bound of the offset and then sends firmware from that offset.
nxpdev->fw_dnld_v3_offset = offset - nxpdev->fw_v3_offset_correction;
serdev_device_write_buf(nxpdev->serdev, nxpdev->fw->data +
nxpdev->fw_dnld_v3_offset, len);
Nothing checks that fw_dnld_v3_offset + len stays within nxpdev->fw->size,
so a controller that asks for an offset or length past the firmware image
makes the driver read past the end of nxpdev->fw->data and send that
memory back over UART.
nxp_recv_fw_req_v1() already bounds the same write. Add the equivalent
check to the v3 path, reject the request when it falls outside the firmware
image, and zero len on the error path so the fw_v3_prev_sent bookkeeping at
free_skb stays consistent. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bnep: pin L2CAP connection during netdev registration
bnep_add_connection() reads the L2CAP connection without holding the
channel lock, then passes its HCI device to register_netdev(). Controller
teardown can clear and release that connection concurrently, leaving the
network device registration path to dereference a freed parent device.
Take a reference to the L2CAP connection while holding the channel lock.
Retain it until register_netdev() has taken the parent device reference. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: IPIP tunnel hardware offload is not yet support
No driver supports for IPIP tunnels yet, give up early on setting up the
hardware offload for this scenario.
This patch adds a stub that can be enhanced to add more configuration
that are currently not supported. As of now, the offload work is
enqueued to the worker, then ignored if the hardware offload
configuration is not supported.
Check the NF_FLOW_HW flag to know if this entry was already tried once
to be offloaded so this is not retried on refresh when unsupported. Move
NF_FLOW_HW flag check to nf_flow_offload_add(). If this NF_FLOW_HW flag
is unset the _del and _stats variants are never called.
This can be updated later on to skip hardware offload work to be queued
in case hardware offload does not support it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: handle unreadable frags
sashiko reports:
When an skb with unreadable fragments (such as from devmem TCP, where
skb_frags_readable(skb) returns false) is processed by the u32 module,
skb_copy_bits() will safely return a negative error code [..]
xt_u32: bail out with hotdrop in this case.
gather_frags: return -1, just as if we had no fragment header.
nfnetlink_queue: restrict to the linear part.
nfnetlink_log: restrict to the linear part.
v2:
- skb_zerocopy helpers don't copy readable flag, i.e. nfnetlink_queue
is broken too
xt_u32 shouldn't return true if hotdrop was set. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/swap: add cond_resched() in swap_reclaim_full_clusters to prevent softlockup
We hit a real softlockup in an internal stress test environment. The
workload was LTP memory/swap stress on a large arm64 machine, with 320
CPUs, about 1TB memory and an 8.6GB swap device. The system was under
heavy load and the swap device had a large number of full clusters. The
softlockup was triggered during a stress test after about 3 days.
So, add periodic cond_resched() calls during large full_clusters
reclaim operations to prevent softlockup issues.
Detailed call trace as follow:
PID: 3817773 TASK: ffff0883bb28b780 CPU: 48 COMMAND: "kworker/48:7"
#0 [ffff800080183d10] __crash_kexec at ffffa4c1361e5de4
#1 [ffff800080183d90] panic at ffffa4c1360d5e9c
#2 [ffff800080183e20] watchdog_timer_fn at ffffa4c136231fa8
...
#16 [ffff8000c4ad3cb0] swap_cache_del_folio at ffffa4c1363e1614
#17 [ffff8000c4ad3ce0] __try_to_reclaim_swap at ffffa4c1363e4bfc
#18 [ffff8000c4ad3d40] swap_reclaim_full_clusters at ffffa4c1363e5474
#19 [ffff8000c4ad3da0] swap_reclaim_work at ffffa4c1363e550c
#20 [ffff8000c4ad3dc0] process_one_work at ffffa4c136102edc
#21 [ffff8000c4ad3e10] worker_thread at ffffa4c136103398
#22 [ffff8000c4ad3e70] kthread at ffffa4c13610d95c |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix NULL pointer dereference in debugfs
shrinker_debugfs_add() creates both "count" and "scan" debugfs files
unconditionally.
That assumes every shrinker implements both count_objects() and
scan_objects(), which is not guaranteed. For example, the xen-backend
shrinker sets count_objects() but leaves scan_objects() NULL, so writing
to its scan file calls through a NULL function pointer and panics the
kernel:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:0x0
Code: Unable to access opcode bytes at 0xffffffffffffffd6.
Call Trace:
<TASK>
shrinker_debugfs_scan_write+0x12e/0x270
full_proxy_write+0x5f/0x90
vfs_write+0xde/0x420
? filp_flush+0x75/0x90
? filp_close+0x1d/0x30
? do_dup2+0xb8/0x120
ksys_write+0x68/0xf0
? filp_flush+0x75/0x90
do_syscall_64+0xb3/0x5b0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
The count path has the same issue in principle if a shrinker omits
count_objects().
To fix it, only create "count" and "scan" debugfs files when the
corresponding callbacks are present. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: shrinker: fix shrinker_info teardown race with expansion
expand_shrinker_info() iterates all visible memcgs under shrinker_mutex,
including memcgs that have not finished ->css_online() yet.
Once pn->shrinker_info has been published, teardown must stay serialized
with expand_shrinker_info() until that memcg is either fully online or no
longer visible to iteration. Today alloc_shrinker_info() breaks that rule
by dropping shrinker_mutex before freeing a partially initialized
shrinker_info array, which may cause the following race:
CPU0 CPU1
==== ====
css_create
--> list_add_tail_rcu(&css->sibling, &parent_css->children);
online_css
--> mem_cgroup_css_online
--> alloc_shrinker_info
--> alloc node0 info
rcu_assign_pointer(C->node0->shrinker_info, old0)
alloc node1 info -> FAIL -> goto err
mutex_unlock(shrinker_mutex)
shrinker_alloc()
--> shrinker_memcg_alloc
--> mutex_lock(shrinker_mutex)
expand_shrinker_info
--> mem_cgroup_iter see the memcg
expand_one_shrinker_info
--> old0 = C->node0->shrinker_info
memcpy(new->unit, old0->unit, ...);
free_shrinker_info
--> kvfree(old0);
/* double free !! */
kvfree_rcu(old0, rcu);
The same problem exists later in mem_cgroup_css_online(). If
alloc_shrinker_info() succeeds but a subsequent objcg allocation fails,
the free_objcg -> free_shrinker_info() unwind path tears down the already
published pn->shrinker_info arrays without shrinker_mutex. The
expand_one_shrinker_info() can race with that teardown in the same way,
leading to use-after-free or double-free of the old shrinker_info.
Fix this by serializing shrinker_info teardown with shrinker_mutex, and by
keeping alloc_shrinker_info() error cleanup inside the locked section. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/shrinker: do not hold RCU lock in shrinker_debugfs_count_show()
Reading the debugfs "count" file of a memcg-aware shrinker can sleep
inside an RCU read-side critical section:
BUG: sleeping function called from invalid context at kernel/cgroup/rstat.c:421
RCU nest depth: 1, expected: 0
css_rstat_flush
mem_cgroup_flush_stats
zswap_shrinker_count
shrinker_debugfs_count_show
shrinker_debugfs_count_show() invokes the ->count_objects() callback under
rcu_read_lock(). The zswap callback flushes memcg stats via
css_rstat_flush(), which may sleep, so it must not run under RCU.
The RCU lock is not needed here. mem_cgroup_iter() takes RCU internally
and returns a memcg holding a css reference (dropped on the next iteration
or by mem_cgroup_iter_break()), so the memcg stays alive without it. The
shrinker is kept alive by the open debugfs file: shrinker_free() removes
the debugfs entries via debugfs_remove_recursive(), which waits for
in-flight readers to drain, before call_rcu(..., shrinker_free_rcu_cb).
The sibling "scan" handler already invokes the sleeping ->scan_objects()
callback with no RCU section.
Drop the rcu_read_lock()/rcu_read_unlock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: cros_ec: Delay dev_set_drvdata() until probe success
If ec_device_probe() fails, cros_ec_class_release releases memory for the
cros_ec_dev structure. However, because the drvdata was already set,
sub-drivers like cros_ec_typec can still retrieve the stale pointer via the
platform device. This leads to a use-after-free when cros_ec_typec attempts
to access &typec->ec->ec->dev on a device that has already been released.
Move dev_set_drvdata() to ensure that the pointer is only made available
once all initialization steps have succeeded.
sysfs: cannot create duplicate filename '/class/chromeos/cros_ec'
Call trace:
sysfs_do_create_link_sd+0x94/0xdc
sysfs_create_link+0x30/0x44
device_add_class_symlinks+0x90/0x13c
device_add+0xf0/0x50c
ec_device_probe+0x150/0x4f0
platform_probe+0xa0/0xe0
...
BUG: KASAN: invalid-access in __memcpy+0x44/0x230
Write at addr f5ffff809e2d33ac by task kworker/u32:5/125
Pointer tag: [f5], memory tag: [fe]
Tainted : [W]=WARN, [O]=OOT_MODULE
Hardware name: Google Navi unprovisioned 0x7FFFFFFF/sku0 board/sku3
Workqueue: events_unbound deferred_probe_work_func
Call trace:
__memcpy+0x44/0x230
cros_ec_check_features+0x60/0xcc [cros_ec_proto]
cros_typec_probe+0xe8/0x6e0 [cros_ec_typec]
platform_probe+0xa0/0xe0 |
| In the Linux kernel, the following vulnerability has been resolved:
media: nxp: imx8-isi: Fix use-after-free on remove
KASAN reports a slab-use-after-free in __media_entity_remove_link()
during rmmod of imx8_isi:
BUG: KASAN: slab-use-after-free in __media_entity_remove_link+0x608/0x650
Read of size 2 at addr ffff0000d47cb02a by task rmmod/724
Call trace:
__media_entity_remove_link+0x608/0x650
__media_entity_remove_links+0x78/0x144
__media_device_unregister_entity+0x150/0x280
media_device_unregister_entity+0x48/0x68
v4l2_device_unregister_subdev+0x158/0x300
v4l2_async_unbind_subdev_one+0x22c/0x358
v4l2_async_nf_unbind_all_subdevs+0xfc/0x1c0
v4l2_async_nf_unregister+0x5c/0x14c
mxc_isi_remove+0x124/0x2a0 [imx8_isi]
Allocated by task 249:
__kmalloc_noprof+0x27c/0x690
mxc_isi_crossbar_init+0x22c/0x560 [imx8_isi]
Freed by task 724:
kfree+0x1e4/0x5b0
mxc_isi_crossbar_cleanup+0x34/0x80 [imx8_isi]
mxc_isi_remove+0x11c/0x2a0 [imx8_isi]
The problem is that mxc_isi_remove() calls mxc_isi_crossbar_cleanup()
before mxc_isi_v4l2_cleanup(). The crossbar cleanup frees the media
entity pads, but the subsequent v4l2 cleanup still tries to remove
media links that reference those pads.
Fix this by calling mxc_isi_v4l2_cleanup() before
mxc_isi_crossbar_cleanup() to ensure all media entities are properly
unregistered while the pads are still valid. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: fix LE list UAF on reset
hci_cc_reset() clears the LE accept and resolving lists without taking
hdev->lock. Other command-complete handlers serialize updates to these
lists with that lock, and the debugfs readers hold it while walking them.
This permits the reset completion and a debugfs read to interleave as
follows:
hci_rx_work debugfs reader
----------- --------------
lock hdev->lock
fetch current entry
list_del(entry)
kfree(entry)
read entry fields
The reader then dereferences a freed list entry and may follow its stale
next pointer.
KASAN reported:
BUG: KASAN: slab-use-after-free in white_list_show+0x15f/0x180
Read of size 1 at addr ffff8881015dab16 by task poc/95
Call Trace:
white_list_show+0x15f/0x180
seq_read_iter+0x3ff/0x1190
seq_read+0x267/0x3d0
vfs_read+0x177/0xa20
ksys_read+0xf7/0x1c0
Allocated by task 91:
hci_bdaddr_list_add+0x1a6/0x3a0
hci_cc_le_add_to_accept_list+0xab/0x140
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Freed by task 90:
kfree+0x131/0x3c0
hci_bdaddr_list_clear+0xd8/0x160
hci_cc_reset+0x28a/0x370
hci_cmd_complete_evt+0x26c/0x9a0
hci_event_packet+0x454/0xb20
hci_rx_work+0x293/0x730
Take hdev->lock around both list clears. This matches the existing
mutation and traversal locking convention. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/nop: fix file reference leak with IOSQE_FIXED_FILE
NOP file-acquisition support choses between a fixed (registered) file and
a normal fget()'d file based on its own IORING_NOP_FIXED_FILE flag in
sqe->nop_flags. However, a request's REQ_F_FIXED_FILE is set
independently from the generic IOSQE_FIXED_FILE sqe flag during request
init, before the issue handler runs.
If a NOP is submitted with IOSQE_FIXED_FILE set (so REQ_F_FIXED_FILE is
set) but without IORING_NOP_FIXED_FILE, io_nop() takes the normal path
and grabs a real reference via io_file_get_normal(). On completion,
io_put_file() only drops the reference when REQ_F_FIXED_FILE is clear,
so the fget()'d file is never released and leaks:
BUG: memory leak
unreferenced object 0xffff88800f42c240 (size 176):
kmem_cache_alloc_noprof+0x358/0x440
alloc_empty_file+0x57/0x180
path_openat+0x44/0x1e50
do_file_open+0x121/0x200
do_sys_openat2+0xa7/0x150
__x64_sys_openat+0x82/0xf0
Decide between fixed and normal file acquisition from REQ_F_FIXED_FILE,
the same way io_assign_file() does for every other opcode, and fold
IORING_NOP_FIXED_FILE into REQ_F_FIXED_FILE at prep time. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: logitech-dj: Fix maxfield check in DJ short report validation
Commit b6a57912854e ("HID: logitech-dj: Prevent REPORT_ID_DJ_SHORT
related user initiated OOB write") added validation for the DJ short
output report, but the error path dereferences rep->field[0] even when
rep->maxfield is zero.
Commit 8b9a097eb2fc ("HID: logitech-dj: fix wrong detection of bad
DJ_SHORT output report") made the check conditional on rep being present,
but a crafted descriptor can still create report ID 0x20 with only padding
output items. hid-core registers the report, ignores the padding field,
and leaves rep->maxfield as zero.
In that case the validation enters the rep->maxfield < 1 branch and then
dereferences rep->field[0]->report_count while printing the error message,
causing a NULL pointer dereference during probe. This is reproducible with
uhid by emulating a Logitech receiver with a padding-only DJ short output
report:
BUG: KASAN: null-ptr-deref in logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
Read of size 4 at addr 0000000000000028 by task kworker/4:1/129
...
Call Trace:
logi_dj_probe+0xb1/0x754 [hid_logitech_dj]
hid_device_probe+0x329/0x3f0 [hid]
really_probe+0x162/0x570
__device_attach+0x137/0x2c0
bus_probe_device+0x38/0xc0
device_add+0xa56/0xce0
hid_add_device+0x19c/0x280 [hid]
uhid_device_add_worker+0x2c/0xb0 [uhid]
Reject the zero-field report before printing the field report_count. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: sch: use raw_spinlock_t in the irq startup path
sch_irq_unmask() enables the GPIO IRQ and then updates the controller
state through sch_irq_mask_unmask(), which takes sch->lock with
spin_lock_irqsave(). The callback can be reached from irq_startup()
while setting up a requested IRQ. That path is not sleepable, but on
PREEMPT_RT a regular spinlock_t becomes a sleeping lock.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the request_threaded_irq() -> __setup_irq() ->
irq_startup() -> sch_irq_unmask() -> sch_irq_mask_unmask() carrier and
used the original spin_lock_irqsave(&sch->lock) edge. Lockdep reported:
BUG: sleeping function called from invalid context
hardirqs last disabled at ... __setup_irq.constprop.0 ... [vuln_msv]
sch_rt_spin_lock_irqsave+0x1c/0x30 [vuln_msv]
sch_irq_mask_unmask.constprop.0+0x31/0x70 [vuln_msv]
__setup_irq.constprop.0+0xd/0x30 [vuln_msv]
Convert the SCH controller lock to raw_spinlock_t. The same lock is
also used by the GPIO direction and value callbacks, but those critical
sections only update MMIO-backed GPIO registers and do not contain
sleepable operations. Keeping this register lock non-sleeping is
therefore appropriate for the irqchip callbacks and does not change the
GPIO-side locking contract. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate sparing table length as an entry count, not a byte count
udf_load_sparable_map() accepts a sparing table when
sizeof(*st) + le16_to_cpu(st->reallocationTableLen) > sb->s_blocksize
is false, i.e. it treats reallocationTableLen as a number of BYTES that
must fit in the block. But the table is walked as an array of 8-byte
sparingEntry elements:
for (i = 0; i < le16_to_cpu(st->reallocationTableLen); i++) {
struct sparingEntry *entry = &st->mapEntry[i];
... entry->origLocation ...
}
in udf_get_pblock_spar15() and udf_relocate_blocks(). A
reallocationTableLen of N therefore passes the check whenever
sizeof(*st) + N <= blocksize, yet the consumers index
sizeof(*st) + N * sizeof(struct sparingEntry) bytes -- up to ~8x the
block. On a crafted UDF image this is an out-of-bounds read in
udf_get_pblock_spar15(); udf_relocate_blocks() additionally feeds the
same length to udf_update_tag(), whose crc_itu_t() reads far past the
block, and its memmove() through st->mapEntry[] is an out-of-bounds
write.
Validate reallocationTableLen as the entry count it is, with
struct_size(). |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate VAT header length against the VAT inode size
udf_load_vat() takes the virtual partition's start offset straight from
the on-disk VAT 2.0 header without checking it against the VAT inode
size:
map->s_type_specific.s_virtual.s_start_offset =
le16_to_cpu(vat20->lengthHeader);
map->s_type_specific.s_virtual.s_num_entries =
(sbi->s_vat_inode->i_size -
map->s_type_specific.s_virtual.s_start_offset) >> 2;
lengthHeader is a fully attacker-controlled 16-bit value. If it exceeds
the VAT inode size, the s_num_entries subtraction underflows to a huge
count, which defeats the "block > s_num_entries" bound in
udf_get_pblock_virt15(); and on the ICB-inline path that function reads
((__le32 *)(iinfo->i_data + s_start_offset))[block]
so a large s_start_offset indexes past the inode's in-ICB data. Mounting
a crafted UDF image with a virtual (VAT) partition then triggers an
out-of-bounds read.
Reject a VAT whose header length does not leave room for at least one
entry within the VAT inode. |
| In the Linux kernel, the following vulnerability has been resolved:
udf: validate free block extents against the partition length
udf_free_blocks() checks the logical block number and count against the
partition length, but drops the extent offset from that final bound. A
crafted extent can pass the guard while logicalBlockNum + offset + count
points past the partition, which later indexes past the space bitmap
array.
A single ftruncate(2) on a file backed by such an extent reliably
panics the kernel. This is a local availability issue. On desktop
systems where UDisks/polkit allows the active user to mount removable
UDF media without CAP_SYS_ADMIN, an unprivileged local user can supply
the crafted filesystem and trigger the panic by truncating a writable
file on it. Systems that require root or CAP_SYS_ADMIN to mount the
image have a higher prerequisite.
No confidentiality or integrity impact is claimed: the reproduced
primitive is an out-of-bounds read of a bitmap pointer slot followed by
a kernel panic.
Use the already computed logicalBlockNum + offset + count value for the
partition length check. Also make load_block_bitmap() reject an
out-of-range block group before indexing s_block_bitmap[], so corrupted
callers cannot walk past the flexible array. |
| In the Linux kernel, the following vulnerability has been resolved:
block: skip sync_blockdev() on surprise removal in bdev_mark_dead()
bdev_mark_dead()'s @surprise == true means the device is already gone.
The filesystem callback fs_bdev_mark_dead() honours this and skips
sync_filesystem(), but the bare block device path (no ->mark_dead op)
lost its !surprise guard when the holder ->mark_dead callback was wired
up (see Fixes), and now calls sync_blockdev() unconditionally, which can
hang forever waiting on writeback that can no longer complete.
syzkaller hit this via nvme_reset_work()'s "I/O queues lost" path:
nvme_mark_namespaces_dead() -> blk_mark_disk_dead() ->
bdev_mark_dead(bdev, true) -> sync_blockdev() blocks in
folio_wait_writeback(), wedging the reset worker and every task waiting
on it.
Skip the sync on surprise removal, matching fs_bdev_mark_dead();
invalidate_bdev() still runs. Orderly removal (surprise == false) is
unchanged.
Found by FuzzNvme(Syzkaller with FEMU fuzzing framework). |
