| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: part: reject MTDPART_OFS_RETAIN in mtd_add_partition()
mtd_add_partition() does not reject the special offset value
MTDPART_OFS_RETAIN (-3), which leads to a WARN_ON in
add_mtd_device() when called through the BLKPG ioctl on NAND
devices. The RETAIN value depends on cur_offset being the end of
the previous partition, but in the dynamic partition path
cur_offset equals the offset argument itself, causing undefined
behavior.
Commit 5daa7b21496a ("mtd: prepare partition add and del functions
for ioctl requests") introduced mtd_add_partition() and correctly
rejected MTDPART_OFS_APPEND (-1) and MTDPART_OFS_NXTBLK (-2),
since those special offsets rely on cur_offset tracking the
previous partition's end. However, commit 1a31368bf92e ("mtd: add a flags
for partitions which should just leave smth. after them")
later added MTDPART_OFS_RETAIN (-3) for the static
partition table path without updating mtd_add_partition() to
also reject this value.
With offset=-3 passed via BLKPG, the RETAIN size calculation in
allocate_partition() underflows (parent_size - 0xFFFFFFFFFFFFFFFD
= parent_size + 3). If the underflow result does not appear to
leave enough space, allocate_partition() jumps to out_register via
goto, skipping erasesize initialization. This results in
erasesize=0, which triggers:
WARN_ON((!mtd->erasesize || !master->_erase) &&
!(mtd->flags & MTD_NO_ERASE))
in add_mtd_device(). If the underflow result appears to leave
enough space, a bogus partition size is calculated, but the
"out of reach" sanity check catches the invalid offset and
creates a disabled empty partition (offset=0, size=0) instead
of returning an error.
Fix this by adding MTDPART_OFS_RETAIN to the rejection list in
mtd_add_partition(), consistent with the existing handling of
APPEND and NXTBLK. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/v3d: Associate BOs with every job that accesses them
A submission can expand into a chain of jobs (e.g. bin + render + cache
clean). Implicit synchronization in v3d_submit_lock_reservations() is gated
on each job's bo[], but the BO list was only ever attached to the last job
of the chain. When that last job is a trailing CACHE_CLEAN job, the job
that actually consumes the BOs (that is, a RENDER or CSD job) was left with
bo_count == 0 and picked up no implicit dependencies. It could therefore
be dispatched to the hardware and read a BO while another context was still
writing it, leading to data corruption.
Attach the BOs to the job that consumes them, so (1) it acquires the
correct implicit dependencies during reservation locking and (2) they are
kept mapped until the end of the submission. Give it references to all
consuming job's BOs through v3d_job_reference_bos() instead of looking the
handles up a second time; that avoids a redundant lookup and guarantees
both jobs reference the exact same objects.
As the CACHE_CLEAN job now carries a BO array as well, add a per-job
`has_implicit_dep` flag so that only the consuming jobs take implicit
dependencies. The CACHE_CLEAN job (a global flush) and the BIN job (binning
waiting on another context is not a realistic scenario) are excluded. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for arena-related insns
Since the interpreter does not support the arena-related insns,
interpreter fallback should not be allowed for these insns in
core.c::__bpf_prog_select_runtime().
Currently, when the interpreter executes the arena ST/LDX/STX insns,
it would hit the BUG_ON() in ___bpf_prog_run() at run time.
[ 2.579196] BPF interpreter: unknown opcode a2 (imm: 0x0)
[ 2.579998] ------------[ cut here ]------------
[ 2.580652] kernel BUG at kernel/bpf/core.c:2349!
[ 2.581314] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when arena map is used in the prog to disallow
interpreter fallback for arena-related insns. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disallow interpreter fallback for gotox insn
The interpreter does not recognize the BPF_JMP|BPF_JA|BPF_X insn, which
is used for insn_array map. Thereafter, it would hit the BUG_ON() in
___bpf_prog_run() at run time.
[ 2.563726] BPF interpreter: unknown opcode 0d (imm: 0x0)
[ 2.564557] ------------[ cut here ]------------
[ 2.565206] kernel BUG at kernel/bpf/core.c:2349!
[ 2.565882] Oops: invalid opcode: 0000 [#1] SMP PTI
Set jit_required as true when insn_array map is used in the prog in
order to disallow interpreter fallback for gotox insn in
core.c::__bpf_prog_select_runtime(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize abort state updates
dw_edma_abort_interrupt() drops vc.lock before changing request and
status. issue_pending() can acquire the lock in that small window,
observe the old busy state, and skip starting queued descriptors. Then
the abort handler overwrites the channel status as idle, leaving the new
descriptors stranded for good.
Keep descriptor completion and the state transition in the same critical
section. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-edma: Serialize channel state checks
pause() and resume() read and update channel state without holding vc.lock,
while the interrupt handlers update the same state under it. Take the same
lock around those state checks so that request, status, and configured stay
consistent.
For example, pause() can observe EDMA_ST_BUSY right before the interrupt
handler completes the final descriptor and moves the channel to
EDMA_ST_IDLE, and then record EDMA_REQ_PAUSE on an already idle channel. No
further interrupt will acknowledge the request, and since issue_pending()
requires EDMA_REQ_NONE, the channel is wedged for good: terminate_all()
leaves the stale request behind, so even reconfiguring the channel does not
recover it.
issue_pending() already runs under vc.lock, but it tests configured before
taking it. Move that test under the lock as well, so configured, request,
and status are evaluated as one channel-state snapshot. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: dac: ad5686: missing NULL check on match data
Verify that chip_info pointer is not NULL. If a user binds the driver
using driver_override via sysfs with a device name not present in the
id_table or of_match_table, match data will be NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v3-its: Prevent leak in its_vpe_irq_domain_alloc()
When its_irq_gic_domain_alloc() fails, the following
its_vpe_irq_domain_free() fails to invoke its_vep_teardown() for the
corresponding interrupt, which leaks the resource.
Invoke its_vpe_teardown() in the error handling path to avoid the leak.
[ tglx: Massaged change log ] |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PCI: Clear driver_data on all paths that free the acpi_pci_root
acpi_pci_root_add() assigns the freshly allocated root to
device->driver_data before dmar_device_add() and pci_acpi_scan_root().
Both failure paths reach the end: label where root is kfree()'d, but
only the pci_acpi_scan_root() path clears driver_data first.
When dmar_device_add() fails during a hot-add, root is freed while
device->driver_data still points at it. The ACPI core does not clear
driver_data on attach failure, so a later acpi_pci_find_root() call may
dereference this dangling pointer.
acpi_pci_root_remove() has the same problem: it frees root without
clearing device->driver_data, leaving a dangling pointer behind after
the root bridge is removed.
Move the NULL assignment to the shared end: label so every error path in
acpi_pci_root_add() clears driver_data before freeing root, and clear it
in acpi_pci_root_remove() as well, so the object is never left reachable
through driver_data after being freed. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zero queue and stack outputs on lock failure
Queue and stack pop/peek helpers accept an uninitialized output buffer
because the verifier expects the helper to initialize it. The empty-map
error path clears the buffer, but a failed lock acquisition returns
-EBUSY without writing it.
Clear the output before returning -EBUSY so BPF programs cannot observe
uninitialized stack contents after a failed helper call. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv, bpf: Fix memory leak in bpf_jit_free
When bpf_int_jit_compile() is called for subprograms, it returns early
during the first pass (!prog->is_func || extra_pass is false), keeping
ctx->offset alive for the subsequent extra pass.
If JIT compilation fails for a later subprogram, the BPF core aborts
and calls bpf_jit_free() to clean up the first subprogram. However,
bpf_jit_free() fails to free jit_data->ctx.offset, which causes a
memory leak of the JIT context offsets array.
Fix this by adding the missing kfree(jit_data->ctx.offset) in
bpf_jit_free(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, riscv: Fix extable handling for arena load_acquire
emit_atomic_ld_st() returns 1 to have build_body() skip the zext after
a sub-word load_acquire. The caller does "ret = ret ?:
add_exception_handler(...)", which skips add_exception_handler() on any
non-zero ret, so the extable entry is missing and a faulting
PROBE_ATOMIC load_acquire oopses.
REG_DONT_CLEAR_MARKER leaves rd stale on fault, and the verifier still
thinks the load overwrote it, so a program can leak it through a map.
Check ret >= 0 before calling add_exception_handler(), and pass rd for
LOAD_ACQ so the fault zeroes rd like a PROBE_MEM load. Return ret
unchanged for the zext skip. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix offset warn check for bpf_res_spin_lock
Sashiko pointed out correctly that the case statement for
BPF_RES_SPIN_LOCK incorrectly checks offset for BPF_SPIN_LOCK.
Fix it by checking res_spin_lock_off instead. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve unique-field state across nested structs
btf_find_struct_field() initializes a fresh seen mask for every recursive
descent. Unique special fields in different levels of the same aggregate
therefore do not see one another. The duplicate fields can reach
btf_parse_fields(), where they trigger an invariant WARN_ON_ONCE(). A
crafted user BTF can consequently trigger the warning before map creation
checks capabilities.
Initialize the seen mask once in btf_find_field() and pass the same pointer
through struct, datasec, and nested-struct walks. This gives the entire field
traversal one shared uniqueness state. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/erdma: Fix CEQ tasklet use-after-free on removal
Each CEQ interrupt handler only schedules eqc->tasklet. The tasklet calls
erdma_ceq_completion_handler(), which reads the DMA-coherent EQ ring
through get_next_valid_eqe() and updates eq->dbrec through notify_eq().
erdma_ceqs_uninit() frees each CEQ IRQ and then destroys its EQ.
free_irq() prevents another hard IRQ and waits for an in-flight handler,
but it does not drain a tasklet that the handler already scheduled. The
tasklet can therefore access eq->qbuf or eq->dbrec after
erdma_eq_destroy() frees them.
Clearing ceq_cb->ready does not synchronize with a tasklet that already
passed the check at the start of erdma_ceq_completion_handler().
Kill the tasklet after free_irq(), when no handler can schedule it again,
and before erdma_ceq_uninit_one() releases the EQ buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: drain QP references after partial table insertion
mana_table_store_ud_qp() publishes a QP at its send-queue id before
inserting the receive-queue id, dropping the XArray lock between the two
xa_insert_irq() calls. A concurrent completion handler can look up the QP
and take a transient reference. When the second insertion fails, the
rollback erased only the send-queue entry and returned, leaving both the
initial table reference and the transient reference outstanding while RDMA
core frees the QP, causing a use-after-free.
Drain the reference as normal destruction does: drop the initial reference
and wait for qp->free, releasing the QP only after every concurrent lookup
returns its reference. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix use after free in ib_query_qp()
When querying a QP via the netlink flow the only synchronization
mechanism for the said QP is rdma_restrack_get(), meanwhile during the
QP destroy path rdma_restrack_del() is called at the end of the
ib_destroy_qp_user() function which is too late, since by then the
vendor specific resources for said QP would already be destroyed, and
till the rdma_restrack_del() is called this QP can still be accessed,
which could cause the use after free below.
Fix this by moving the rdma_restrack_begin_del() to the start of the
ib_destroy_qp_user(), which in turn waits for all usages of the QP to be
done then removes it from the database to prevent access to it while it
is being destroyed.
RIP: 0010:ib_query_qp+0x15/0x50 [ib_core]
Code: 48 83 05 5d 8e b9 ff 01 eb b5 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 c7 46 40 00 00 00 00 48 c7 46 78 00 00 00 00 <48> 8b 07 48 8b 80 88 01 00 00 48 85 c0 74 1a 48 83 05 54 91 b9 ff
RSP: 0018:ff11000108a8f2f0 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ff11000108a8f370 RCX: ff11000108a8f370
RDX: 0000000000000000 RSI: ff11000108a8f3d8 RDI: 0000000000000000
RBP: ff1100010de5a000 R08: 0000000000000e80 R09: 0000000000000004
R10: ff110001057a604c R11: 0000000000000000 R12: ff11000108a8f370
R13: ff110001090e8000 R14: 0000000000000000 R15: ff110001057a602c
FS: 00007f2ffd8db6c0(0000) GS:ff110008dc90b000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010b9a7004 CR4: 0000000000373eb0
Call Trace:
<TASK>
mlx5_ib_gsi_query_qp+0x21/0x50 [mlx5_ib]
mlx5_ib_query_qp+0x689/0x9d0 [mlx5_ib]
ib_query_qp+0x35/0x50 [ib_core]
fill_res_qp_entry_query.isra.0+0x47/0x280 [ib_core]
? __wake_up+0x40/0x50
? netlink_broadcast_filtered+0x15a/0x550
? kobject_uevent_env+0x562/0x710
? ep_poll_callback+0x242/0x270
? __nla_put+0xc/0x20
? nla_put+0x28/0x40
? nla_put_string+0x2e/0x40 [ib_core]
fill_res_qp_entry+0x138/0x190 [ib_core]
res_get_common_dumpit+0x4a5/0x800 [ib_core]
? fill_res_qp_entry_query.isra.0+0x280/0x280 [ib_core]
nldev_res_get_qp_dumpit+0x1e/0x30 [ib_core]
netlink_dump+0x16f/0x450
__netlink_dump_start+0x1ce/0x2e0
rdma_nl_rcv_msg+0x1d3/0x330 [ib_core]
? nldev_res_get_qp_raw_dumpit+0x30/0x30 [ib_core]
rdma_nl_rcv_skb.constprop.0.isra.0+0x108/0x180 [ib_core]
rdma_nl_rcv+0x12/0x20 [ib_core]
netlink_unicast+0x255/0x380
? __alloc_skb+0xfa/0x1e0
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x230
? copy_msghdr_from_user+0xea/0x170
___sys_sendmsg+0x7c/0xb0
? __futex_wait+0x95/0xf0
? __futex_wake_mark+0x40/0x40
? futex_wait+0x67/0x100
? futex_wake+0xac/0x1b0
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xb90
entry_SYSCALL_64_after_hwframe+0x4b/0x53 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/core: Fix potential use after free in counter_release()
When accessing a counter via the netlink path the only synchronization
mechanism for the said counter is rdma_restrack_get().
Currently, rdma_restrack_del() is invoked at the end of
counter_release(), which is too late, since by that point
vendor-specific resources associated with the counter might already be
freed. This can leave a short window where the counter remains
accessible through restrack, leading to a potential use-after-free.
Fix this by moving the rdma_restrack_del() call to be before the
freeing of the vendor-specific resources, ensuring that the counter is
removed from restrack before its internal resources are released.
This guarantees that no new users hold references to a counter that is
in the process of destruction. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Fix requested device removal race
scmi_protocol_device_unrequest() drops scmi_requested_devices_mtx while
notifying listeners but continues to retain the per-protocol list head.
When two SCMI drivers for the same protocol unregister concurrently, one
thread can remove the final request and free the list head while the other
is running its notifier. The latter then dereferences the freed list head
after reacquiring the mutex and can free it a second time.
Complete the list and IDR updates, including freeing an empty list head,
before dropping the mutex. Keep the blocking notifier outside the critical
section and retain only the detached request across the callback. |
