| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: s390: pci: Validate AIBV and AISB before pinning guest pages
The AIBV holds one bit per MSI-X vector for a given function. The size of
the bit vector is derived from the NOI and the AIBVO. If the size of the
AIBV exceeds a single page boundary, then reject the request as we cannot
safely pin the guest AIBV.
Similarly reject the request if the AISB address is not 8-byte aligned as
the architecture requires doubleword alignment for the summary bit address.
Since the AISBO can address up to 64 bits, the size of the AISB can only be
8 bytes for the function. This also ensures the AISB doesn't exceed a
single page boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tap: fix wrong transport_header when sending VLAN-tagged frame
In tap_get_user_xdp(), when processing a VLAN-tagged frame (e.g.
ETH_P_8021Q), skb_set_network_header() is called first to advance
network_header past the VLAN tag to the inner protocol header.
skb_probe_transport_header() is then called with skb->protocol still
set to ETH_P_8021Q, while nhoff (derived from skb_network_offset())
already points past the VLAN tag to the inner protocol header.
In __skb_flow_dissect(), proto is initialized to ETH_P_8021Q and nhoff
points past the VLAN tag. When the dissector hits case ETH_P_8021Q, it
reads a struct vlan_hdr at the current nhoff via __skb_header_pointer(),
but that offset contains the inner protocol header (e.g. an IP header).
The bytes are misinterpreted as a VLAN header, yielding a garbage
encapsulated EtherType that matches no known protocol. The dissector
returns false, so skb_probe_transport_header() never calls
skb_set_transport_header(), leaving transport_header at its uninitialized
sentinel value (~0U).
Move skb_set_network_header() to after skb_probe_transport_header(). At
the time skb_probe_transport_header() is called, network_header still
points to the VLAN header (offset ETH_HLEN), so nhoff is correct and the
flow dissector can parse the VLAN header, extract the inner EtherType,
and advance nhoff to the inner protocol header, allowing transport_header
to be set correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix invalidate lock leak on setattr writeback failure
fuse_do_setattr() takes filemap_invalidate_lock() for a DAX truncate
(fault_blocked = true) and releases it at the out:/error: labels. But
when a writeback flush is also needed, a write_inode_now() failure
returns directly and leaks the lock, so any later fault or truncate on
the file stalls on the stale rwsem.
For example, truncate(2) on a setuid file reaches fuse_do_setattr()
with both ATTR_SIZE and ATTR_MODE set:
truncate(2)
└─ do_truncate()
├─ dentry_needs_remove_privs() # S_ISUID
└─ notify_change() # KILL_SUID -> ATTR_MODE
└─ fuse_setattr() # no killpriv:
│ # ia_valid |= ATTR_MODE
└─ fuse_do_setattr()
├─ filemap_invalidate_lock() # IS_DAX && is_truncate
└─ write_inode_now() # is_wb && ATTR_MODE
└─ if (err) # e.g. daemon -> -EIO
return err # <- lock leaked
Fix this by adding an unlock label that releases the lock before
returning the error, and use it for the fuse_dax_break_layouts()
failure path as well. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: Allocate iomap inline_data using alloc_page
This fixes a BUG reported in iomap_write_end_inline:
iomap_inline_data_valid checks that the inline_data fits within
a page. If the inline_data is allocated with kmemdup there's no
guarantee that it's page-aligned, so the check sometimes fails.
Allocate it with alloc_page to ensure it's page-aligned. |
| An issue was discovered in Lantronix EDS3000PS 3.1.0.0R2. The host parameter of the TFTP client in the Filesystem Browser page is not properly sanitized. This can be exploited to escape from the original command and execute an arbitrary one with root privileges. |
| The administrator password can be changed without knowledge of the current password. When chained with an authentication bypass vulnerability, this issue may allow unauthenticated attackers to modify the administrator password. |
| In the Linux kernel, the following vulnerability has been resolved:
mshv: Order pt_vp_array publish against irqfd assertion path
mshv_partition_ioctl_create_vp() initialises a VP struct (allocations,
mutex_init, init_waitqueue_head, page mappings) and then publishes the
pointer into partition->pt_vp_array. Several ISR paths read this array
locklessly: the intercept ISR, the two scheduler ISRs, and
mshv_try_assert_irq_fast() on the irqfd fast path.
Of these, only mshv_try_assert_irq_fast() can structurally race the
publish. It runs from an eventfd waker without holding pt_mutex, and
MSHV_IRQFD does not require the target lapic_apic_id (== vp_index) to
refer to an existing VP at registration time. A user can therefore
register an irqfd targeting a yet-to-be-created VP, then trigger
mshv_try_assert_irq_fast() concurrently with MSHV_CREATE_VP for the
same index. On weakly-ordered architectures the reader can observe a
non-NULL pointer in pt_vp_array before the initialising stores to the
VP struct become visible, leading to use of partially-initialised
fields (e.g. vp_register_page).
The other ISR readers cannot reach this race: the hypervisor will not
generate intercept or scheduler messages for a VP that has never been
told to run, and the user can only call MSHV_RUN_VP on the VP fd
returned by MSHV_CREATE_VP, which by construction is returned after
the publish. Leave those readers as plain loads.
Use smp_store_release() in mshv_partition_ioctl_create_vp() to publish
the pointer, and pair it with smp_load_acquire() in
mshv_try_assert_irq_fast(). On x86 these compile to plain accesses
under TSO; on ARM64 they emit one-instruction acquire/release barriers,
acceptable on this fast path.
The destroy-side path (destroy_partition() clearing pt_vp_array[i] to
NULL after kfree(vp)) has a separate ordering and lifetime concern
that is out of scope here. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: remove fscache backend entirely
EROFS over fscache was introduced to provide image lazy pulling
functionality. After the feature landed, the fscache subsystem made
netfs a new hard dependency, which is unexpected for a local filesystem
and has an kernel-defined caching hierarchy which could be inflexible
compared to the fanotify pre-content hooks. Therefore, this feature has
been deprecated for almost two years.
As EROFS file-backed mounts and fanotify pre-content hooks both upstream
for a while and already providing equivalent functionality (erofs-utils
has supported fanotify pre-content hooks), let's remove the fscache
backend now.
The main application of this feature is Nydus [1], and they plan to move
to use fanotify pre-content hooks in the near future too.
I hope this patch can be merged into Linux 7.2, which is also motivated
by newly found implementation issues [2][3] that are not worth
investigating given the deprecation and limited development resources.
The associated fscache/cachefiles cleanup patch will follow separately
through the vfs tree (netfs) later: it seems fine since the codebase is
isolated by CONFIG_CACHEFILES_ONDEMAND.
[1] https://github.com/dragonflyoss/nydus/blob/v2.1.0/docs/nydus-fscache.md
[2] https://github.com/dragonflyoss/nydus/pull/1824
[3] https://lore.kernel.org/r/20260619135800.1594811-1-michael.bommarito@gmail.com |
| llama.cpp b5693 and before is vulnerable to Uncontrolled Recursion in common/json-schema-to-grammar.cpp, resulting in a denial of service. |
| llama.cpp b5693 and before has a Reachable Assertion via the gguf_reader::read function. |
| Authorization Bypass Through User-Controlled Key (CWE-639) in Fleet Server can lead to information disclosure via Manipulating User-Controlled Variables (CAPEC-77). The authorization decision for artifact downloads relied on a client-supplied value that was persisted without being validated against the server-side record of the requesting agent's assignment. An authenticated party in possession of a valid enrolled agent credential could therefore retrieve a policy the agent is not assigned to. |
| Dell PowerStore contains a Protection Mechanism Failure vulnerability. An authenticated user with limited privileges could potentially exploit this vulnerability to bypass access restrictions and gain escalated privileges. |
| llama.cpp through commit 97f06e9, when started with the --reranking flag, allows remote attackers to cause a denial of service (std::bad_alloc and HTTP 500) via a negative top_n value in a POST request to /rerank. |
| Analyzing a PDF with a deeply nested or cyclic table of contents can cause a StackOverflowError in the ingestion thread.
Spring AI 2.0.0
Spring AI 1.1.0 - 1.1.8
Spring AI 1.0.0 - 1.0.9 |
| In the Linux kernel, the following vulnerability has been resolved:
net/tls: Fail tls_sw_splice_read() after a failed async decrypt
When an async decrypt fails, tls_decrypt_done() records the error in
ctx->async_wait.err and calls tls_err_abort(), which stores it in
sk_err. tls_sw_recvmsg() and tls_sw_read_sock() each read
async_wait.err once they hold the reader lock and fail the call: a
record that did not authenticate breaks the connection.
tls_sw_splice_read() has no such check, and sk_err does not stand in
for one. tls_rx_rec_wait() tests sk_err only inside the loop it
skips whenever a record is already parsed, and the first reader to
reach sock_error() clears it, while async_wait.err persists. A
splice therefore keeps delivering records on a connection that
recvmsg() and read_sock() refuse to read.
Read async_wait.err in tls_sw_splice_read() as the other two readers
do. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: espintcp: fix UAF during close
ZDI reported and analyzed a race condition during close for espintcp
sockets:
espintcp_close() frees emsg->skb via kfree_skb() without holding
any socket lock. Concurrently, the xfrm_trans_reinject work queue
invokes esp_output_tcp_finish() -> espintcp_push_skb() ->
espintcp_push_msgs() -> skb_send_sock_locked(), which reads the
same skb as a data source.
Fix this by adding a synchronize_rcu() call after resetting sk_prot,
since esp_output_tcp_finish() runs under RCU and won't use a socket
with sk_prot == &tcp_prot. Simply taking the socket lock in
espintcp_close() could lead to leaks, if esp_output_tcp_finish()
re-adds an skb in the slot we just freed. After this, the existing
barrier() is no longer needed. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix invalidate lock leak on open O_TRUNC DAX failure
fuse_open() takes filemap_invalidate_lock() for a DAX truncate
(dax_truncate = true) and releases it before the out_inode_unlock
label. But when fuse_dax_break_layouts() fails, the goto
out_inode_unlock skips the unlock and leaks the rwsem, so any later
fault or truncate on the file stalls on the stale lock.
fuse_dax_break_layouts() can fail with -ERESTARTSYS when a signal
interrupts the wait for busy DAX pages to drain:
open("file", O_RDWR | O_TRUNC)
└─ fuse_open()
├─ filemap_invalidate_lock() # dax_truncate
└─ fuse_dax_break_layouts()
└─ dax_break_layout()
└─ wait_page_idle() # TASK_INTERRUPTIBLE
└─ fuse_wait_dax_page() # unlock, schedule, re-lock
└─ signal → -ERESTARTSYS
goto out_inode_unlock # <- lock leaked
Fix this by moving filemap_invalidate_unlock() below the label so
that all error paths release the lock, and rename the label to
out_unlock as it now covers more than just the inode lock. |
| Partition interceptor may be improperly added while sending message.
Spring Cloud Stream 5.0.0 - 5.0.2
Spring Cloud Stream 4.3.0 - 4.3.3
Spring Cloud Stream 4.2.0 - 4.2.6 |
| Authorization Bypass Through User-Controlled Key vulnerability in sc Internet Vivoo WP Rentals allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects WP Rentals: from n/a before 3.16.0. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: mxs-dcp - fix source scatterlist length access
mxs_dcp_aes_block_crypt() uses sg_dma_len() without mapping the source
scatterlist with dma_map_sg() first. Therefore, sg_dma_len() is invalid
and could return zero or a stale DMA length, causing encryption and
decryption to process the wrong number of bytes when
CONFIG_NEED_SG_DMA_LENGTH=y.
Use the original scatterlist length instead. |
