| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free histogram the var ref when its initialization fails
create_var_ref() allocates a VAR_REF hist_field and then calls
init_var_ref() to fill it in. When that fails the field is leaked.
commit 656fe2ba85e8 ("tracing: Use hist trigger's var_ref array to destroy
var_refs") made destroy_hist_field() return early for
HIST_FIELD_FL_VAR_REF, since var refs are freed by walking the trigger's
var_refs[] array instead. create_var_ref() adds the field to that array
only after init_var_ref() has succeeded, so on this path the field is in
neither place and nothing frees it. The call was correct when it was
written, before var refs were taken out of destroy_hist_field().
init_var_ref() cannot free it either. The caller owns the field, so
init_var_ref() undoes only its own string allocations and leaves the
field alone. Freeing it there would leave create_var_ref() passing freed
memory to destroy_hist_field(), which reads its flags.
Call __destroy_hist_field(), which frees the field without consulting
the flag. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Don't destroy fields when event removal fails
destroy_user_event() destroys the event's fields before attempting to
remove the trace event call. If user_event_set_call_visible() fails,
e.g. because the event is still enabled and trace_remove_event_call()
returns -EBUSY, the event is left registered with an irreversibly
destroyed field list. Any subsequent interaction with the event then
operates on an empty field list while it is still fully visible in
tracefs.
Move the field destruction after the call removal, and splice the
field list back onto the event when the removal fails so the event
remains in a consistent state. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: return compat ioctl results directly
The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but
then calls the native handler. Their different command sizes make native
dispatch return -ENOIOCTLCMD.
For GET_FD, this overwrites receive_fd()'s return value after the
descriptor is installed, leaking one fd per call. Return handled compat
results directly and use native dispatch only for other commands. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: Fix UDP length overflow with PMTU discover and big MTU
This commit bounds cork->base.fragsize to IP6_MAX_MTU for UDP sockets to
avoid a possible overflow of UDP length that triggers a WARN in
udp_set_len_short when setsockopt IPV6_MTU_DISCOVER is set to
IPV6_PMTUDISC_DO or IPV6_PMTUDISC_PROBE, and a large packet is sent over
a netdev with an unusually large MTU.
Steps to reproduce (included in the new selftest):
1. Set device MTU bigger than IP6_MAX_MTU. cork->base.fragsize will be
set to that MTU in ip6_setup_cork.
2. Set IPV6_MTU_DISCOVER to IPV6_PMTUDISC_PROBE or IPV6_PMTUDISC_DO. It
lets maxnonfragsize be set to device MTU (cork->fragsize) in
__ip6_append_data, rather than to IP6_MAX_MTU.
3. Send 65528 bytes of payload (+8 bytes of UDP header, +40 bytes of
IPv6 header). Device MTU allows it (it's only one byte bigger than
IP6_MAX_MTU, and the device MTU is bigger than that).
4. The UDP length in the built packet is 65536, which overflows the
16-bit length field and triggers the WARN in udp_set_len_short.
To avoid breaking sending UDP jumbograms over raw IPv6 sockets, limit
the change to UDP sockets only.
The original overflow bug with IPv6 and IPV6_PMTUDISC_DO seems to
predate git history (verified reproduction on 2.6.21), was fixed later,
and then reappeared in commit 427faee167bc ("net: ipv6: introduce
ip6_dst_mtu_maybe_forward"), which is chosen as the Fixes tag here. The
overflow with IPV6_PMTUDISC_PROBE reproduces since its introduction in
commit 628a5c561890 ("[INET]: Add IP(V6)_PMTUDISC_RPOBE"). |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: invalidate vring access on IOTLB transitions
When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB
metadata are interpreted in a different address space. Keeping them
across the transition can leave stale ring mappings in use.
Clearing d->iotlb before taking the VQ locks also lets a worker observe
a transient NULL d->iotlb and fall back to d->umem while translating a
descriptor.
Add a common vhost_clear_device_iotlb() helper for vhost-net and
vhost-vsock. Take all VQ mutexes in index order before dropping the
device-wide IOTLB, invalidate each VQ's cached ring access and metadata,
clear pending IOTLB messages, and free the old table after the handoff.
This serializes the transition with workers and prevents mixed address
space mappings.
On the first direct-to-IOTLB transition, invalidate the cached vring
addresses. When an existing device IOTLB is replaced, preserve the
GIOVA ring addresses and reset only the metadata cache. After clearing
ACCESS_PLATFORM, userspace must configure the vring addresses for the
new address mode.
vhost_vq_invalidate_access() clears desc, avail, and used together.
Treat the VQ as invalidated only when all three are NULL, since a single
GIOVA address may legitimately be zero. |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: validate virtqueue alignment
vduse_validate_config() only checks the upper bound of vq_align. Invalid
values can therefore reach vring_create_virtqueue_map(). The split-ring
helpers use align - 1 as a bit mask, so the alignment must be a non-zero
power of two. A zero value makes vring_size() drop the descriptor and
available-ring part and vring_init() leave the used ring pointer NULL.
The VIRTIO spec requires the used ring to start at an address
aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as
well as non-power-of-two values before they reach the virtio ring helpers.
Opening a virtio-net device created with vq_align=0 triggered:
BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100
Read of size 2 at addr 0000000000000000 by task systemd-network/1062
Call Trace (relevant frames):
dump_stack_lvl
print_report
kasan_report
__asan_load2
virtqueue_kick_prepare_split+0xe3/0x100
virtqueue_kick_prepare+0x40/0x60
try_fill_recv+0x857/0x1250
virtnet_open+0x189/0x460
__dev_open+0x225/0x390
__dev_change_flags+0x368/0x3b0
netif_change_flags+0x56/0xc0
do_setlink.isra.0+0x68c/0x1e30
Validate the value before it reaches the virtio ring helpers. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_u32: fix duplicate handle when node ID pool is exhausted
gen_new_kid() falls back to returning max (htid | 0xFFF) when both
idr_alloc_u32() ranges are full, instead of reporting an error.
u32_change() trusts that value and inserts a new knode with a handle
that is already live in the hash table, breaking handle uniqueness
within the table's node ID space.
The handle was never reserved in ht->handle_idr, so every later error
path that does idr_remove(&ht->handle_idr, handle) removes the
reservation of a different, live knode, which is then reused — one
failed add compounds into further duplicates.
The 4095 limit is per (table, bucket) — ht->handle_idr is per hash
table and the range is derived from htid (bucketid), so a table with
divisor 256 can legitimately hold 256*4095 knodes.
The sibling helper gen_new_htid() has the same silent in-band failure:
it returns 0 when the tp_c handle pool (1..0x7FF) is full, and
u32_init() publishes the root hash table with handle 0 without
checking. Two root tables with handle 0 alias in u32_lookup_ht(),
allowing cross-tcf_proto knode add/lookup/delete. Add the same
exhaustion check that the divisor path already has.
Return an error so u32_change() fails with ENOSPC/ENOMEM when the
node ID space is exhausted, and so u32_init() fails with -ENOMEM
when the hash table ID space is exhausted. The extack message
distinguishes pool exhaustion (-ENOSPC) from a transient allocation
failure (-ENOMEM).
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_CLS_U32=y (or =m with module loaded)
- Create a clsact qdisc on a device, then add 4095 u32 filters with
auto-generated handles to fill the node ID space for the root hash
table (single bucket). The 4096th auto-handle filter add triggers
the duplicate handle (fh 800::fff reused). Reachable at Level 2
(unshare -Urn, namespace-local CAP_NET_ADMIN).
- For gen_new_htid: create 2047 u32 proto entries on the same block
to fill the tp_c handle pool, then create one more. The root table
gets handle 0 and aliases with other handle-0 root tables. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: treat any nonzero dio zero-range return as an error
ntfs_dio_zero_range() returns either 0 or a negative errno from
blkdev_issue_zeroout(); it never returns a positive value. The
zeroing failure check in ntfs_attr_fallocate() therefore never fired,
so a failed zeroing operation was silently ignored: the loop kept
going, the newly allocated clusters were folded into initialized_size
and the write could succeed leaving stale on-disk data.
Treat any nonzero return as an error and abort the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
write_mft_record_nolock() maps the MFT record folio with
kmap_local_folio(), but the pre_write_mst_fixup() and
bio_add_folio() failure paths jump to the error label without
unmapping it. kmap_local mappings are stack-ordered per task, so
leaking one corrupts the nesting for any outer mapping.
Unmap the folio on those error paths too. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Remove __counted_by from struct amdxdna_cmd_chain
struct amdxdna_cmd_chain contains a flexible array annotated with
__counted_by(command_count). Since the structure is stored in shared
AMDXDNA_BO_SHARE memory, userspace can modify command_count concurrently.
If command_count is changed to zero, the bounds check generated from
__counted_by may fail and trigger a kernel panic.
Remove __counted_by to avoid relying on the userspace-controlled
command_count for the flexible array bounds check. |
| Improper authorization in Azure Database for PostgreSQL allows an authorized attacker to elevate privileges over a network. |
| RouterOS WebFig contains an unauthenticated file-read vulnerability in the /jsproxy path where a newly allocated session retains a stale uninitialized principal pointer used for file authorization. An unauthenticated attacker can prepare the allocator so that the file-serving path dereferences this pointer with sufficient rights, then supply parent-directory components in an encrypted URI to escape the WebFig file namespace and disclose root-owned files, including configuration stores containing credentials.This issue affects only 7.x branch was fixed in versions: 7.23.4 (Long-term) and 7.24.2 (Stable) |
| This
vulnerability exists in the Netlink ICT HG323RW router due to insufficient
authorization and input validation controls in the diagnostic script import
functionality. An authenticated attacker could exploit this vulnerability by
uploading and executing a specially crafted script through the web management
interface.
Successful exploitation of this vulnerability
could allow the attacker to execute arbitrary operating system commands with
root privileges resulting in complete compromise of the affected device. |
| Incorrect Authorization vulnerability in TÜBİTAK ULAKBİM UlakPDF allows Authentication Bypass.
This issue affects UlakPDF: through 09092026. |
| Incorrect Authorization vulnerability in TÜBİTAK ULAKBİM UlakPDF allows Privilege Escalation.
This issue affects UlakPDF: through 09092026. |
| sprintf-js through 1.1.3 passes unbounded precision specifiers to toFixed, toExponential, and toPrecision methods without validation, causing uncaught RangeError exceptions. Attackers who control format strings can inject precision values exceeding ECMAScript limits to abort calling operations with minimal payload. |
| A Stored Cross-Site Scripting (XSS) vulnerability has been identified in OpenText Vendor Invoice Management for SAP Solutions Capture Validation application. Under certain conditions, this issue could allow execution of unauthorized script content in a user's browser, potentially impacting confidentiality and integrity of information processed through the application. |
| Key exchange without entity authentication vulnerability in HAVELSAN Inc. Liman Render Engine allows Adversary in the Middle (AiTM).
This issue affects Liman Render Engine: from 1.0 before 1.2-75. |
| Improper certificate validation vulnerability in HAVELSAN Inc. Liman Render Engine allows Adversary in the Middle (AiTM).
This issue affects Liman Render Engine: from 1.0 before 1.2-75. |
| A security flaw has been discovered in Open-Web-Analytics up to 1.8.1. Affected is the function Event::loadFromArray of the file queue.php of the component Remote Event Queue Endpoint. Performing a manipulation results in deserialization. The attack can be initiated remotely. Upgrading to version 1.8.2 is able to address this issue. The patch is named 78c1222ec0e2119d84684032da1541120a2cdd23. The affected component should be upgraded. |
