| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Internally found bugs present in Thunderbird 154, Thunderbird ESR 153.1 and Thunderbird ESR 140.14. Some of these bugs showed evidence of memory corruption or another security-relevant defect and we presume that with enough effort some of these could have been exploited. This vulnerability was fixed in Firefox 155, Firefox ESR 115.40, Firefox ESR 140.15, Firefox ESR 153.2, Thunderbird 155, Thunderbird 140.15, and Thunderbird 153.2. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) cap PDIO scan in get_multiple at ADM1266_PDIO_NR
adm1266_gpio_get_multiple() iterates the PDIO portion of the
caller-supplied mask using
for_each_set_bit_from(gpio_nr, mask,
ADM1266_GPIO_NR + ADM1266_PDIO_STATUS) {
...
}
where ADM1266_PDIO_STATUS is the PMBus command code (0xE9, i.e. 233),
not the number of PDIO pins. The intended upper bound is
ADM1266_GPIO_NR + ADM1266_PDIO_NR = 25.
gpiolib hands in a mask sized for gc.ngpio (= 25 bits on this chip),
so the iteration walks find_next_bit() up to 242, reading up to 217
extra bits (a handful of unsigned-long words: four on 64-bit, seven
on 32-bit) of whatever lives past the end of the mask in the
caller's stack. Any incidental set bit in that range then drives a
set_bit(gpio_nr, bits) call that writes past the end of the
caller-supplied bits array too -- both out-of-bounds.
Substitute ADM1266_PDIO_NR for the constant so the scan stops at the
last real PDIO bit. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (pmbus/adm1266) bounce blackbox records through a protocol-sized buffer
adm1266_pmbus_block_xfer() copies the device-supplied block payload
into the caller-provided buffer using the device-supplied length:
memcpy(data_r, &msgs[1].buf[1], msgs[1].buf[0]);
The helper does not know how large data_r is and trusts the device to
return at most one record's worth of bytes. adm1266_nvmem_read_blackbox()
violates that contract: it advances read_buff inside data->dev_mem in
ADM1266_BLACKBOX_SIZE (64-byte) strides while the helper is willing to
write up to ADM1266_PMBUS_BLOCK_MAX (255) bytes. A device that returns
more than 64 bytes on the trailing record (read_buff offset 1984 in
the 2048-byte dev_mem allocation) overflows dev_mem by up to 191 bytes
before the post-call
if (ret != ADM1266_BLACKBOX_SIZE)
return -EIO;
can reject the response.
Contain the fix in the caller without changing the helper signature:
read each record into a 255-byte local bounce buffer that matches the
helper's maximum output, validate the returned length, and only then
copy exactly ADM1266_BLACKBOX_SIZE bytes into the dev_mem slot. |
| Description
NGINX JavaScript (njs) has a vulnerability in the XML module's namespace prefix list parser, reachable through the xml.exclusiveC14n() method. An unauthenticated remote attacker can trigger it when an affected NGINX configuration passes an externally controlled XML namespace prefix list to that method. Both the njs and the QuickJS (qjs) engines are affected. A crafted prefix list causes an out-of-bounds write past the end of a heap allocation. With the njs engine, which is the engine used when the js_engine directive is absent, this corrupts adjacent objects and crashes the NGINX worker. With the QuickJS engine, the same call additionally leaks the prefix list on every invocation, causing worker memory to grow across requests. The official nginxinc/nginx-saml reference implementation is affected during SAML signature verification. It reads InclusiveNamespaces/@PrefixList from an untrusted SAML message and passes it to xml.exclusiveC14n() before the signature has been verified, so a valid SAML signature is not required. A crafted SAML Response, Assertion, LogoutRequest, or LogoutResponse is sufficient. Code execution has not been demonstrated and cannot be ruled out for all platforms, as the effect of the out-of-bounds write depends on conditions beyond the attacker's control.
Impact
This vulnerability allows remote attackers to cause a denial of service on the NGINX system, either through repeatable worker restarts or through worker memory growth or possibly trigger code execution. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| A flaw was found in Lighthouse. A remote attacker, by compromising a spoke cluster, can exploit a vulnerability where the destination namespace for resource injection is derived from an attacker-controlled label or annotation on the broker object. This allows the attacker to inject unauthorized EndpointSlices and ServiceImports into any namespace on peer clusters, including critical system namespaces like kube-system and openshift-*. This could lead to privilege escalation or other forms of system compromise within the cluster. |
| A flaw was found in the `submariner-operator` component of Red Hat Advanced Cluster Management for Kubernetes. This vulnerability allows a cluster administrator, or any user with permissions to modify the Submariner Custom Resource (CR), to specify an unvalidated image path. This lack of validation enables an attacker to execute arbitrary code with elevated privileges across the entire cluster, including control-plane nodes, by deploying a malicious image. |
| Kestra is an open-source, event-driven orchestration platform. Prior to 1.0.45 and 1.3.21, AuthenticationFilter in Kestra OSS uses request.getPath().endsWith("/configs") to whitelist the public configuration endpoint from Basic Auth. Because the check is a suffix match rather than an exact path match, any API path whose last segment is configs bypasses authentication entirely. An unauthenticated remote attacker can exploit this to create and execute arbitrary workflows without credentials. Because Kestra ships with script execution plugins (plugin-script-shell, plugin-script-python, etc.) enabled by default, this directly results in unauthenticated Remote Code Execution as root inside the Kestra worker container. This vulnerability is fixed in 1.0.45 and 1.3.21. |
| In Eclipse Ditto versions [1.3.0, 3.9.6], the ImplicitThingCreationMessageMapper of the connectivity service builds a CreateThing command by substituting placeholder values (e.g. {{ header:device_id }}) resolved from inbound message headers into a pre-configured JSON "thing" template as raw, un-escaped strings, and then parses the resulting string as JSON. Because the placeholder engine performs no JSON escaping and is unaware of the surrounding JSON string context, a resolved value containing a double-quote character can break out of its string and inject additional JSON structure.
When a connection is configured to use this mapper with a template that reflects a header whose value a publishing device can control (for example an MQTT 5 user property, an AMQP 1.0 application property, or a Kafka record header), an attacker able to publish on that connection can inject an inline _policy object. The inline policy overrides the administrator-configured policyId, letting the attacker assign an arbitrary access-control policy to the newly created digital twin — gaining full read/write access to it and potentially revoking the legitimate owner's access, with no administrator interaction.
Exploitation requires all of the following: the connection uses the (non-default) ImplicitThingCreation mapper; its template reflects an attacker-controllable header; and, for the policy-override impact, the connection's authorization subjects are permitted to create policies (the default). Deployments that restrict the connection's subjects to thing creation only via the entity-creation configuration are not affected by the policy-override impact. |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: reject duplicate leaves in GROUP request
net_shaper_nl_group_doit() does not deduplicate NET_SHAPER_A_LEAVES
entries. When userspace supplies the same leaf handle twice, the same
old-parent pointer lands twice in old_nodes[]. The cleanup loop double
frees the parent. Of course the same parent may still be in old_nodes[]
twice if we are moving multiple of its leaves.
Note that this patch also implicitly fixes the fact that the
i >= leaves_count path forgets to set ret. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tls: fix off-by-one in sg_chain entry count for wrapped sk_msg ring
When an sk_msg scatterlist ring wraps (sg.end < sg.start),
tls_push_record() chains the tail portion of the ring to the head
using sg_chain(). An extra entry in the sg array is reserved for
this:
struct sk_msg_sg {
[...]
/* The extra two elements:
* 1) used for chaining the front and sections when the list becomes
* partitioned (e.g. end < start). The crypto APIs require the
* chaining;
* 2) to chain tailer SG entries after the message.
*/
struct scatterlist data[MAX_MSG_FRAGS + 2];
The current code uses MAX_SKB_FRAGS + 1 as the ring size:
sg_chain(&msg_pl->sg.data[msg_pl->sg.start],
MAX_SKB_FRAGS - msg_pl->sg.start + 1,
msg_pl->sg.data);
This places the chain pointer at
sg_chain(data[start], (MAX_SKB_FRAGS - msg_start + 1) .. =
&data[start] + (MAX_SKB_FRAGS - msg_start + 1) - 1 =
data[start + (MAX_SKB_FRAGS - start + 1) - 1] =
data[MAX_SKB_FRAGS]
instead of the true last entry. This is likely due to a "race" of
the commit under Fixes landing close to
commit 031097d9e079 ("bpf: sk_msg, zap ingress queue on psock down")
Convert to ARRAY_SIZE and drop the data[start] / - start (as suggested
by Sabrina). |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.19.4, an out-of-bounds read and a one-byte out-of-bounds write exist in the state-cookie parser of `mod_auth_openidc`. The issue is fixed in version 2.4.19.4 by stopping the scan at the string terminator so a value-less token is rejected. No in-product workarounds are available. As a stop-gap, an upstream reverse proxy or WAF that rejects or normalizes malformed `Cookie` headers (tokens lacking `=`) can reduce exposure, but upgrading is the recommended remediation. |
| GStreamer MRF File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of MRF files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29608. |
| GStreamer OGG File Parsing Stack-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of OGG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29584. |
| GStreamer PNG File Parsing Heap-based Buffer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GStreamer. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of PNG files. The issue results from the lack of proper validation of the length of user-supplied data prior to copying it to a heap-based buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29581. |
| GIMP APNG File Parsing Integer Overflow Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of GIMP. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of APNG files. The issue results from the lack of proper validation of user-supplied data, which can result in an integer overflow before allocating a buffer. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-29401. |
| Sudo through 1.9.17p2 fails to apply intercept policy checks to the execveat system call in ptrace-based intercept mode. Users permitted to run specific commands can execute denied programs by calling execveat directly or through fexecve, bypassing policy enforcement and logging. |
| Tornado is a Python web framework and asynchronous networking library. Prior to 6.5.8, Tornado parses application/x-www-form-urlencoded request bodies with urllib.parse.parse_qs in tornado/escape.py without passing max_num_fields. RequestHandler._execute in tornado/web.py parses the body before handler dispatch through HTTPServerRequest._parse_body and parse_body_arguments in tornado/httputil.py, so an unauthenticated request body containing millions of separator-delimited fields can synchronously stall the single-threaded event loop and delay every connection. The body is bounded only by max_buffer_size, which defaults to 104857600 bytes. This issue is fixed in version 6.5.8. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
| A maliciously crafted DWG or DXF file, when parsed through Autodesk AutoCAD, can force an Out-of-Bounds Read vulnerability. A malicious actor can leverage this vulnerability to cause a crash or disclose sensitive information. |
