| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Out-of-bounds write for some Intel(R) PROSet/Wireless WiFi Software for Windows before version 23.160 within Ring 2: Device Drivers may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (low) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| Out-of-bounds write in the firmware for the Intel(R) AMT and Intel(R) Standard Manageability within Ring 3: User Applications may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (low) impacts. |
| Finit provides fast init for Linux systems. Finit's urandom plugin has a heap buffer overwrite vulnerability at boot which leads to it overwriting other parts of the heap, possibly causing random instabilities and undefined behavior. The urandom plugin is enabled by default, so this bug affects everyone using Finit 4.2 or later that do not explicitly disable the plugin at build time. This bug is fixed in Finit 4.12. Those who cannot upgrade or backport the fix to urandom.c are strongly recommended to disable the plugin in the call to the `configure` script. |
| A stack-based buffer overflow vulnerability exists in the built-in web interface of DiskBoss Enterprise versions 7.4.28, 7.5.12, and 8.2.14. The vulnerability arises from improper bounds checking on the path component of HTTP GET requests. By sending a specially crafted long URI, a remote unauthenticated attacker can trigger a buffer overflow, potentially leading to arbitrary code execution with SYSTEM privileges on vulnerable Windows hosts. |
| An out-of-bounds write vulnerability exists in the
cv_upgrade_sensor_firmware functionality of Dell ControlVault3 prior to 5.15.10.14 and Dell ControlVault 3 Plus prior to 6.2.26.36.
A specially crafted ControlVault API call can lead to an out-of-bounds
write. An attacker can issue an API call to trigger this vulnerability. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that all image channels have the same pixel type (and size), and that if there are four channels, the first four are "B", "G", "R" and "A". The channel parsing code can be found in decode_header. The buffer td->uncompressed_data is allocated in decode_block based on the xsize, ysize and computed current_channel_offset.
The function dwa_uncompress then assumes at [5] that if there are 4 channels, these are "B", "G", "R" and "A", and in the calculations at [6] and [7] that all channels are of the same type, which matches the type of the main color channels.
If we set the main color channels to a 4-byte type and add duplicate or unknown channels of the 2-byte EXR_HALF type, then the addition at [7] will increment the pointer by 4-bytes * xsize * nb_channels, which will exceed the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, there's an implicit assumption that the height and width are divisible by 8.
If the height or width of the image is not divisible by 8, the copy loops at [0] and [1] will continue to write until the next multiple of 8.
The buffer td->uncompressed_data is allocated in decode_block based on the precise height and width of the image, so the "rounded-up" multiple of 8 in the copy loop can exceed the buffer bounds, and the write block starting at [2] can corrupt following heap memory.
We recommend upgrading to version 8.0 or beyond. |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| When decoding a frame for a SANM file (ANIM v0 variant), the decoded data can be larger than the buffer allocated for it.
Frames encoded with codec 48 can specify their resolution (width x height). A buffer of appropriate size is allocated depending on the resolution.
This codec can encode the frame contents using a run-length encoding algorithm. There are no checks that the decoded frame fits in the allocated buffer, leading to a heap-buffer-overflow.
process_frame_obj initializes the buffers based on the frame resolution:
We recommend upgrading to version 8.0 or beyond. |
| When parsing the header for a DHAV file, there's an integer underflow in offset calculation that leads to reading the duration from before the start of the allocated buffer.
If we load a DHAV file that is larger than MAX_DURATION_BUFFER_SIZE bytes (0x100000) for example 0x101000 bytes, then at [0] we have size = 0x101000. At [1] we have end_buffer_size = 0x100000, and at [2] we have end_buffer_pos = 0x1000.
The loop then scans backwards through the buffer looking for the dhav tag; when it is found, we'll calculate end_pos based on a 32-bit offset read from the buffer.
There is subsequently a check [3] that end_pos is within the section of the file that has been copied into end_buffer, but it only correctly handles the cases where end_pos is before the start of the file or after the section copied into end_buffer, and not the case where end_pos is within the the file, but before the section copied into end_buffer. If we provide such an offset, (end_pos - end_buffer_pos) can underflow, resulting in the subsequent access at [4] occurring before the beginning of the allocation.
We recommend upgrading to version 8.0 or beyond. |
| When calculating the content path in handling of MPEG-DASH manifests, there's an out-of-bounds NUL-byte write one byte past the end of the buffer.When we call xmlNodeGetContent below [0], it returns a buffer precisely allocated to match the string length, using strdup internally. If this buffer is not an empty string, it is assigned to root_url at [1].If the last (non-NUL) byte in this buffer is not '/' then we append '/' in-place at [2]. This will write two bytes into the buffer, starting at the last valid byte in the buffer, writing the NUL byte beyond the end of the allocated buffer.
We recommend upgrading to version 8.0 or beyond. |
| We have identified a buffer overflow issue allowing out-of-bounds write when processing LLMNR or mDNS queries with very long DNS names. This issue only affects systems using Buffer Allocation Scheme 1 with LLMNR or mDNS enabled.
Users should upgrade to the latest version and ensure any forked or derivative code is patched to incorporate the new fixes. |
| An issue was discovered in Dolby UDC 4.5 through 4.13. A crash of the DD+ decoder process can occur when a malformed DD+ bitstream is processed. When Evolution data is processed by evo_priv.c from the DD+ bitstream, the decoder writes that data into a buffer. The length calculation for a write can overflow due to an integer wraparound. This can lead to the allocated buffer being too small, and the out-of-bounds check of the subsequent write to be ineffective, leading to an out-of-bounds write. |
| Out-of-bounds Write vulnerability was discovered in Open Design Alliance Drawings SDK before 2025.10. Reading crafted DWF file and missing proper checks on received SectionIterator data can trigger an unhandled exception. This can allow attackers to cause a crash, potentially enabling a denial-of-service attack (Crash, Exit, or Restart) or possible code execution. |
| A vulnerability classified as critical has been found in GNU PSPP 82fb509fb2fedd33e7ac0c46ca99e108bb3bdffb. Affected is the function parse_variables_option of the file utilities/pspp-convert.c. The manipulation leads to out-of-bounds write. The attack needs to be approached locally. The exploit has been disclosed to the public and may be used. |
| Out-of-bounds Write vulnerability in dail8859 NotepadNext (src/lua/src modules). This vulnerability is associated with program files ldebug.C, lvm.C.
This issue affects NotepadNext: through v0.11. |
| The following APIs for the Silcon Labs SiWx91x prior to vesion 3.4.0 failed to check the size of the output buffer of the caller which could lead to data corruption on the host (Cortex-M4) application.
sl_si91x_aes
sl_si91x_gcm
sl_si91x_ccm
sl_si91x_sha |
| NVIDIA Bluefield and ConnectX contain a vulnerability in the management interface that could allow a malicious actor with high privilege access to execute arbitrary code. |
| In MIT Kerberos 5 (aka krb5) before 1.22 (with incremental propagation), there is an integer overflow for a large update size to resize() in kdb_log.c. An authenticated attacker can cause an out-of-bounds write and kadmind daemon crash. |
| The drivers in the tool packages use RTL_QUERY_REGISTRY_DIRECT flag to read a registry value to which an untrusted user-mode application may be able to cause a buffer overflow. |
