| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: rpl: reserve mac_len headroom when recompressed SRH grows
ipv6_rpl_srh_rcv() decompresses an RFC 6554 Source Routing Header, swaps
the next segment into ipv6_hdr->daddr, recompresses, then pulls the old
header and pushes the new one plus the IPv6 header back. The
recompressed header can be larger than the received one when the swap
reduces the common-prefix length the segments share with daddr (CmprI=0,
CmprE>0, seg[0][0] != daddr[0] gives the maximum +8 bytes).
pskb_expand_head() was gated on segments_left == 0, so on earlier
segments the push consumed unchecked headroom. Once skb_push() leaves
fewer than skb->mac_len bytes in front of data,
skb_mac_header_rebuild()'s call to:
skb_set_mac_header(skb, -skb->mac_len);
will store (data - head) - mac_len into the u16 mac_header field, which
wraps to ~65530, and the following memmove() writes mac_len bytes ~64KiB
past skb->head.
A single AF_INET6/SOCK_RAW/IPV6_HDRINCL packet over lo with a two
segment type-3 SRH (CmprI=0, CmprE=15) reaches headroom 8 after one
pass; KASAN reports a 14-byte OOB write in ipv6_rthdr_rcv.
Fix this by expanding the head whenever the remaining room is less than
the push size plus mac_len, and request that much extra so the rebuilt
MAC header fits afterwards. |
| A vulnerability has been identified in SCALANCE LPE9403 (6GK5998-3GS00-2AC2) (All versions < V2.1 HF0 with SINEMA Remote Connect Edge Client installed). Affected devices do not properly sanitize configuration parameters.
This could allow a non-privileged local attacker to execute root commands on the device. |
| A vulnerability was detected in Linksys RE7000 2.0.15. This affects the function platform_event_pingTest of the file /cgi-bin/json.cgi?PingTest of the component PingTest Handler. The manipulation of the argument pingTestIp/pingTestPktSize/pingTestTimes results in os command injection. The attack can be launched remotely. The exploit is now public and may be used. |
| Tobit Laboratories AG TeamDavid's Webbox application implements an API endpoint that is vulnerable to a
buffer overflow condition. By submitting a specially crafted JSON body,
such as one that is at least 8 characters long and begins with a number,
an unauthenticated attacker can cause the server to crash, resulting in
denial of service. Depending on the stack state or if a stack canary
can be disclosed through another vulnerability, this buffer overflow
could potentially lead to remote code execution and full compromise of
the server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application’s endpoint “//serverClient_close.html” is vulnerable to a
buffer overflow vulnerability in multiple form data parameters. By
submitting excessively long values in these parameters, an authenticated
attacker can trigger a server crash, resulting in denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Tobit Laboratories AG TeamDavid's Webbox application implements various file upload functionalities that are
vulnerable to a buffer overflow condition. By specifying an excessively
long filename in a file upload request, an unauthenticated attacker can
trigger a crash of the server, resulting in a denial of service.
Depending on the stack state or if a stack canary can be disclosed
through another vulnerability, this buffer overflow could potentially be
exploited for remote code execution, leading to full compromise of the
server. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| Memory-safety vulnerability in github.com/jackc/pgx/v5. |
| cli-mcp-server 0.2.5 contains a command allowlist bypass vulnerability in the _validate_command_with_operators function when ALLOW_SHELL_OPERATORS is enabled. Attackers can use shell command substitution syntax like $(...) or backticks to execute non-allowlisted commands that bypass the ALLOWED_COMMANDS validation check. |
| zerox 1.1.20 contains an OS command injection vulnerability in the file download mechanism where the temporary file extension derived from document URLs is interpolated unsanitized into shell commands executed by poppler utilities. Attackers can craft document URLs with malicious file extensions containing command substitution syntax to execute arbitrary OS commands before document processing occurs. |
| An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in the SonicWall Network Security Manager (NSM) On-Prem Management interface allows an authenticated attacker with SuperAdmin privileges to inject arbitrary commands that are executed on the underlying host, resulting in remote code execution. |
| PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain a privilege escalation and denial-of-service vulnerability in DirectIo64.sys that allows local attackers to read arbitrary Model-Specific Registers or write zero to any MSR through exposed IOCTLs with insufficient blocklist enforcement. Attackers can exploit the unrestricted write IOCTL to zero out the system call handler MSR, causing an immediate unrecoverable kernel crash on the next system call, or read security-sensitive MSRs used to locate kernel data structures. |
| PassMark PerformanceTest before 11.1 build 1012, BurnInTest before 11.1 build 1000, and OSForensics before 11.1 build 1016 contain a privilege escalation vulnerability in DirectIo64.sys that allows local users to issue arbitrary IN and OUT instructions to any x86 I/O port due to missing allowlist or port validation on exposed IOCTLs. Attackers can obtain a device handle and write to sensitive ports including the PS/2 controller port, CPU reset ports, CMOS configuration ports, and interrupt controller ports to cause an immediate system reset or other hardware-level manipulation from a standard user account. |
| A vulnerability was identified in Advantech WISE-6610-NB, WISE-6610-EB, WISE-6610-TB, WISE-6610-JB, WISE-6610-CB, WISE-6610-EL-NB, WISE-6610-EL-EB, WISE-6610-EL-TB, WISE-6610-EL-JB, WISE-6610-EL-CB, WISE-6610P-DEA, WISE-6610P-DNA and WISE-6610P-DTA 1.2.1_20251110. Affected is an unknown function of the file /cgi-bin/luci/admin/openvpn_apply of the component Background Management. Such manipulation of the argument delete_file leads to os command injection. The attack can be executed remotely. The exploit is publicly available and might be used. Upgrading to version 1.2.4_20260821 is able to address this issue. It is advisable to upgrade the affected component. The vendor explains: "The delete operation has been redesigned to map the requested file type to a fixed allowlisted path, require a numeric tunnel ID, reject invalid requests, and use the native filesystem API (fs.unlink) instead of constructing a shell command from request data." |
| A vulnerability was detected in Tenda CP3 27.5.57.101. The affected element is the function sub_2F77E8 of the file Apis/system.c of the component Network Configuration Management. Performing a manipulation results in os command injection. The attack may be initiated remotely. |
| A weakness has been identified in Tenda CP3 27.5.57.101. This issue affects some unknown processing of the file Net/NetCheckPing.cpp. This manipulation of the argument interface_name/host causes os command injection. The attack can be initiated remotely. |
| MOOS-IvP through 24.8.1 contains a remote code execution vulnerability in alogsplit's SplitHandler::handlePreCheckSplitDir() function that fails to sanitize shell metacharacters in log file pathnames. Attackers can embed shell syntax in log file names or the --dir parameter to execute arbitrary commands with the privileges of the operator running alogsplit. |
| ntop nDPI versions before 6.0 contain a heap buffer overflow vulnerability in the ndpi_json_string_escape function that writes beyond caller-supplied buffer boundaries. Attackers can trigger the overflow by supplying crafted network packet data including TLS SNI, HTTP headers, or DNS names that reach the vulnerable function, causing heap corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix uncancelled rxrpc OOB message handler
Fix AFS to cancel its OOB message processing (typically to respond to
security challenges). Also move OOB message processing to afs_wq so that
it's also waited for and make the OOB handler just return if the net
namespace is no longer live. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: bound SGL data length before allocating command buffers
nvmet_tcp_map_data() reads the host-controlled 32-bit sgl->length
and, for the in-capsule offset descriptor (type 0x01), checks it
against port->inline_data_size before use. Any other SGL descriptor
type -- including the non-inline transport SGL data-block descriptor
(type (NVME_TRANSPORT_SGL_DATA_DESC << 4) | NVME_SGL_FMT_TRANSPORT_A,
the type a real host uses for out-of-capsule writes) skips that check
entirely and falls straight through to:
cmd->req.sg = sgl_alloc(len, GFP_KERNEL, &cmd->req.sg_cnt);
with len taken directly from the wire, unbounded up to 4 GiB.
nvmet_req_init() only parses the command and never inspects
sgl->length, and nvmet_check_transfer_len() -- the only other place
transfer_len is validated -- runs later, from req->execute(), after
the allocation has already happened. For a write command the target
responds with an R2T and parks the command waiting for the host to
send the data; if the host (or an unauthenticated peer that simply
never follows up) never does, the sgl_alloc() buffer stays resident
for the life of the command. NVMe/TCP has no mandatory authentication
in the default configuration, so any peer able to reach the target
portal and complete a Fabrics connect can drive this with a single
crafted command, repeatable across queues and connections for
amplification. This is unbounded kernel memory allocation
triggered by a remote, effectively unauthenticated peer.
Validate len against the same NVMET_TCP_MAXH2CDATA ceiling this file
already uses to bound per-PDU H2C data, for every SGL descriptor type,
before doing any allocation. This closes the gap for the non-inline
descriptor while leaving the existing, tighter inline_data_size check
in place for the in-capsule case.
Runtime-verified on a v6.19 KASAN stand: with this bound in place, a
crafted write command carrying an oversized non-inline SGL length is
rejected before sgl_alloc() runs, where the same request previously
drove an unbounded ~256 MiB kernel allocation (up to 4 GiB) that
stayed resident pending an R2T the host never satisfies. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix uninit-value in the RF discover/activated NTF handlers
nci_rf_discover_ntf_packet() and nci_rf_intf_activated_ntf_packet() each
parse a notification into an on-stack struct (nci_rf_discover_ntf /
nci_rf_intf_activated_ntf) that is not initialised. The RF
technology-specific parameters are only extracted when
rf_tech_specific_params_len is non-zero, so a notification that reports a
zero length leaves the rf_tech_specific_params union uninitialised - and
both handlers then pass it to nci_add_new_protocol(), which reads it:
- discover: nci_add_new_target() -> nci_add_new_protocol();
- activated: nci_target_auto_activated() -> nci_add_new_protocol().
nci_add_new_protocol() uses nfca_poll->nfcid1_len as both a branch
condition and a memcpy() length and copies nfcid1/sens_res/sel_res into
ndev->targets, which is later exposed to user space via NFC_CMD_GET_TARGET.
BUG: KMSAN: uninit-value in nci_add_new_protocol+0x624/0x6c0
nci_add_new_protocol+0x624/0x6c0
nci_ntf_packet+0x25b2/0x3c30
nci_rx_work+0x318/0x5d0
process_scheduled_works+0x84b/0x17a0
worker_thread+0xc10/0x11b0
kthread+0x376/0x500
Local variable ntf.i created at:
nci_ntf_packet+0xbc2/0x3c30
Zero-initialise both on-stack notifications so the union reads back as
zero when no technology-specific parameters are present. |
