| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenEXR is the reference implementation and specification for the EXR image format, widely used in the motion picture industry. OpenEXR versions 3.2.0 through 3.2.10, 3.3.0 through 3.3.12, and 3.4.0 through 3.4.13 are vulnerable on ILP32 builds to a heap out-of-bounds read. The issue occurs when a crafted RLE-compressed EXR causes the 64-bit unpacked size to truncate before allocation in OpenEXRCore decoding.c and unpack_32bit() reads beyond the resulting buffer, allowing denial of service. This issue is fixed in versions 3.2.11, 3.3.13, and 3.4.14. |
| Insufficient policy enforcement in Extensions in Google Chrome prior to 153.0.8010.36 allowed a remote attacker who had compromised the renderer process and leveraged social engineering to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - copy IV using skcipher ivsize
AF_ALG rfc3686-ctr-aes-ccp requests pass an 8-byte IV to the driver.
ccp_aes_complete() restores AES_BLOCK_SIZE bytes into the caller's IV
buffer while RFC3686 skciphers expose an 8-byte IV, so the restore
overruns the provided buffer.
Use crypto_skcipher_ivsize() to copy only the algorithm's IV length. |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| YesWiki is a wiki system written in PHP. From version 4.1.0 to before version 4.6.6, YesWiki's archived-revision view reflects the time GET parameter into a hidden HTML input in handlers/page/show.php without escaping. Because MySQL coerces malformed DATETIME strings, an attacker can append HTML or JavaScript to a valid archived revision timestamp, still load that archived revision, and execute arbitrary JavaScript in the victim's browser. The vulnerable form is only rendered when the victim can both read and edit the target page. In restricted deployments this requires a victim with read and write access to that page. On a default doryphore 4.6.5 install, public pages such as PagePrincipale were editable anonymously during validation, so the issue can also affect unauthenticated visitors in that configuration. This issue has been patched in version 4.6.6. |
| SAP GUI for Java does not correctly enforce the trust level policy for certain functions invoked from a connected backend system. A low-privileged attacker could exploit this weakness by manipulating a connected backend system to trigger affected functionality. This could allow arbitrary command execution on the victim's machine, leading to a high impact on the confidentiality, integrity, and availability of the affected system. |
| SAP Approuter does not sufficiently validate tenant context in inbound requests. An unauthenticated attacker could send specially crafted requests to spoof the tenant context under conditions not fully within their control. Successful exploitation could allow limited access to another tenant's information, resulting in a low impact on confidentiality. There is no impact on integrity and availability. |
| DeepSeek Harness before 0.1.2-alpha.1 contains an authentication bypass vulnerability in its local HTTP control-plane API that allows attackers to gain full agent control by supplying a spoofed Host header, as the server validates only the client-supplied Host header value rather than the actual TCP connection origin. Attackers can exploit this flaw to invoke privileged commands such as commands/execute with danger-full-access permissions, escalate session approval policies to unconfined execution, and retrieve all stored conversations without any credential or API key. |
| YesWiki is a wiki system written in PHP. Prior to version 4.6.6, YesWiki's Bazar widget handler reflects the id GET parameter into HTML attributes using strip_tags() only. Because strip_tags() does not escape double quotes, an attacker can break out of the attribute value, inject an event handler such as onmouseover, and execute arbitrary JavaScript in the victim's browser. This issue is reachable without authentication. During validation, the vulnerable widget route returned the injected HTML for both /HomePage/widget?id=... and /NoSuchPage/widget?id=..., which shows that no login, no page ownership, no edit rights, and not even a valid page tag were required. The only routing prerequisite observed was that the Bazar extension is enabled and the request includes an id parameter. This issue has been patched in version 4.6.6. |
| There is a lack of XSS escaping in the Spark History Server prior to 3.5.8 which allows a malicious Spark job to generate arbitrary unescaped frontend code which could lead to a minimal privilege escalation in browser. Users are encouraged to upgrade to Spark 3.5.8 or later.
This CVE is marked as "low" since the path to exploit requires both relatively high permissions (ability to launch a Spark job) and requires tricking a user with higher permissions to log in and visit the Spark history web page.
Users are encouraged to upgrade their Spark history servers to Spark 3.5.8 or later. |
| In libxml2 before 2.15.4, there is a heap-based buffer overflow in xmlXPtrEvalXPtrPart because of xmlXPtrEval xpointer length saturation. |
| The Grav Form plugin (getgrav/grav-plugin-form) versions 8.0.6 through 9.1.19 select the reCAPTCHA version to validate based solely on which response field key is present in the submitted payload. On a site configured for reCAPTCHA v3, an anonymous attacker can place their v3 token under the v2 field name (g-recaptcha-response instead of token), causing validation to use the v2 branch, which never applies the score threshold or verifies the expected action. This results in a complete bypass of reCAPTCHA v3 bot protection. The issue is fixed in version 9.1.20. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: validate option length before reading conf opt value
l2cap_get_conf_opt() derives the option length from the
attacker-controlled opt->len field and immediately dereferences
opt->val (as u8, get_unaligned_le16() or get_unaligned_le32(), or a
raw pointer for the default case) before any caller has confirmed
that opt->len bytes are present in the buffer. The callers
(l2cap_parse_conf_req(), l2cap_parse_conf_rsp() and
l2cap_conf_rfc_get()) only detect a malformed option afterwards, once
the running length has gone negative, by which point the
out-of-bounds read has already executed.
An existing post-hoc length check keeps the garbage value from being
consumed, so this is not a data leak in the current control flow. It
is still a validate-after-use ordering bug: up to 4 bytes are read
past the end of the buffer before it is known to contain them, and it
is fragile to future changes in the callers.
Fix it at the source. Pass the end of the buffer into
l2cap_get_conf_opt() and refuse to touch opt->val unless the full
option (header + value) fits. Each caller computes an end pointer
once before the loop and checks the return value directly instead of
inferring the error from a negative length. |
| In rsync 3.0.1 through 3.4.1, receive_xattr relies on an untrusted length value during a qsort call, leading to a receiver use-after-free. The victim must run rsync with -X (aka --xattrs). On Linux, many (but not all) common configurations are vulnerable. Non-Linux platforms are more widely vulnerable. |
| Files is a module for managing files inside spaces and user profiles. In versions 0.16.9 and below, the File Move functionality does not contain logic that prevents injection of arbitrary JavaScript, which can lead to Browser JS code execution in the context of the user’s session. This is fixed in version 0.16.10. |
| Traefik is an HTTP reverse proxy and load balancer. From 3.7.0 until 3.7.3, there is a high severity vulnerability in Traefik's domain-fronting protection (SNICheck) that allows an unauthenticated client to bypass mutual TLS enforced through wildcard router TLSOptions. When a router uses a wildcard host rule such as Host(*.example.com) with stricter TLS options (for example RequireAndVerifyClientCert), SNICheck resolves the TLS options for the HTTP Host header using exact map lookups only and never applies wildcard matching. If another permissive SNI is served on the same entrypoint, an attacker can complete the TLS handshake under the permissive options and then send an HTTP Host header targeting the wildcard-protected backend, reaching it without presenting a client certificate. This affects the regular HTTPS / HTTP-2 path and does not require HTTP/3. This vulnerability is fixed in 3.7.3. |
| A WebFlux application using functional endpoints and deployed with DispatcherServlet may be vulnerable to a header predicate bypass in a pre-flight request.
Spring Framework 7.0.0 - 7.0.8
Spring Framework 6.2.0 - 6.2.19
Spring Framework 6.1.0 - 6.1.28
Spring Framework 6.0.0 - 6.0.30
Spring Framework 5.3.0 - 5.3.49
Spring Framework 5.2.5.RELEASE - 5.2.25.RELEASE |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: cs42l43: Sanity check firmware size
Currently the code checks if a firmware was received, however it does
not verify that the firmware size is larger than the firmware header. As
the firmware pointer is dereferenced as a pointer to the header
structure this could lead to an out of bounds memory access. Add the
missing check. |
| PrivateBin is an online pastebin where the server has zero knowledge of pasted data. Prior to 2.0.5, AttachmentViewer.setAttachment in js/privatebin.js uses getAttachmentMimeType to accept attacker-controlled MIME types and uses getBlobUrl to create a same-origin blob before setting attachmentLink's href for the Download attachment link. The SVG-only sanitization branch updates only the preview blob, so text/html, image/svg, application/xhtml+xml, and text/xml attachments can remain active in the download blob. On an instance with fileupload = true and a weakened, stripped, or absent Content Security Policy, an anonymous attacker can create such an attachment, and a victim who opens the link in a new tab causes inline JavaScript to execute in the PrivateBin origin. The script can read origin-scoped local storage and issue same-origin requests, including requests to applications co-hosted on the same domain. This issue is fixed in version 2.0.5. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/percpu-km: fix bitmap overflow and accounting in pcpu_create_chunk()
In pcpu_create_chunk(), nr_pages is the total contiguous backing
allocation, i.e., nr_units * pcpu_unit_pages, but pcpu_chunk_populated()
uses it to set chunk->populated, whose size is pcpu_unit_pages, bitmap.
Since bit N in chunk->populated means page offset N inside every unit is
backed. When nr_units > 1, the function writes beyond chunk->populated.
Fix it by using chunk->nr_pages.
It also fixes the global pcpu_nr_empty_pop_pages accounting, since
pcpu_balance_free() only iterates up to chunk->nr_pages.
Commit a63d4ac4ab609 ("percpu: make percpu-km set chunk->populated bitmap
properly") introduced the bitmap overflow issue. Later, commit
b539b87fed37f ("percpu: implmeent pcpu_nr_empty_pop_pages and
chunk->nr_populated") added pcpu_nr_empty_pop_pages and caused the
accounting issue. |
