| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fs: don't silently unmount busy mounts
The propagate_mount_busy() helper exists to decide whether a synchronous
can suceed. It does that by looking at the copies of the victims in the
mounts its parent propagates to. One of those functions from propagation
hell.
It skips a copy that has child mounts except for the case of a single
child mount covering the copy's root. That algorithm used to be exact.
It isn't anymore.
Originally only childless copies were unmounted during propagation.
And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating
shadow/side mounts.") ended up adding covered mounts to both sides in
one go.
Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts
in any order") and that started to unmount more than before:
[1]: A copy of a mount is unmounted when each of its children is either
its overmount or a copy of the victim itself. In the former case
the overmount gets reparented. In the latter case the copy of the
victim will end up being unmounted.
So propagate_umount() ended up being rewritten without adjusting
propagate_mount_busy(). And currently propagate_mount_busy() doesn't
look at copies of the victim that have two or more children nor a single
child that is not the overmount.
So any such copy in [1] is not checked for
references. The result is that a synchronous unmount succeeds, pulling
out a mount that is still in use.
A container can run into this with its own mounts. The host shares a
tree with the container and the host has a mount in that tree:
mount -t tmpfs none /mnt
mount --make-shared /mnt
mount -t tmpfs none /mnt/a
The container's /mnt is a slave copy of the host mount. The container
now takes a detached copy of the tree and mounts that copy beneath its
propagated copy of /mnt/a and keeps the file descriptor to the tree
open:
unshare -m --propagation unchanged
mount --make-rslave /
fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE)
move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH)
grep /mnt /proc/self/mountinfo
775 355 ... /mnt ... master:646
777 775 ... /mnt/a ... master:646
776 777 ... /mnt/a ... master:647
778 777 ... /mnt/a/a ... master:647
The now attached tree (777) is now mounted beneath the container's copy
of /mnt/a. That's also where the host mount sits (as seen from the host
mount namespace). So the propagated copy (776) of the host's mount is on
top of its root and the copy of that (778) is inside it. Now the host
runs:
umount /mnt/a
and it succeeds. The moved tree tree and the copy inside of it are gone
from the container. Now only the propagated copy is left and it got
reparented to where it was before:
grep /mnt /proc/self/mountinfo
775 355 ... /mnt ... master:646
776 775 ... /mnt/a ...
But the file descriptor still refers to the moved tree. So a synchronous
umount detached a mount that is still in use.
Teach propagate_mount_busy() the same checks that propagate_umount()
does. It now checks for a single victim mount without children
for which it can assume that MNT_LOCKED is cleared on every copy like
propagate_umount() does. The copies form chains. IOW, when a copy itself
receives propagation from the victim's parent then the mount at the same
mountpoint inside that copy is a copy as well. Whether a mount receives
propagation from the victim's can simply be checked by walking its
masters. Walk each chain once from its top so we are sure that nested
copies stay linear. Check every reference once of every copy that gets
unmounted. |
| Overly permissive file permissions in AWS CLI before 1.44.78 (v1) and 2.34.29 (v2) on Unix-like systems where the umask has not been configured to restrict file permissions (the default on most systems) may allow other local users on the same host to read credentials written by certain CLI subcommands (aws codeartifact login, aws iam create-virtual-mfa-device, aws deploy register).
To remediate this issue, users should upgrade to AWS CLI 1.44.78 (v1) or 2.34.29 (v2) or later. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Force MSR bitmap refresh if runtime eVMCS controls are modified
Force a refresh of the vmcs02 MSR bitmap during nested VM-Enter if the
runtime eVMCS controls (pin, primary, secondary, etc.) are being updated.
If L1 isn't intercepting TPR writes, runs L2 with TPR virtualization, and
then runs the same L2 with TPR virtualization disabled, KVM will fail to
refresh msr_bitmap02 and leave TPR in passthrough mode even though TPR
virtualization is disabled. I.e. failure to refresh the bitmap lets L2 (or
L1 by proxy) read and write L0's TPR. |
| Hyland Desktop Host for Windows before 25.1.1 is vulnerable to local privilege escalation. This is caused by a privileged service running from the %PROGRAMDATA%\Hyland\DesktopHost\bin folder with weak permissions. A local user can exploit this to escalate privileges. |
| A flaw was found in Podman. If an attacker can pass a crafted tar archive to the `podman load` command, they can create files on the host machine with the privileges of the user running Podman. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skmsg: preserve sg.copy across SG transforms
The sk_msg sg.copy bitmap is part of the scatterlist entry ownership
state. A set bit tells sk_msg_compute_data_pointers() not to expose the
entry through writable BPF ctx->data. This protects entries backed by
pages that are not private to the sk_msg, such as splice-backed file
page-cache pages.
Several sk_msg transform paths move, copy, split, or compact
msg->sg.data[] entries without moving the matching sg.copy bit. This can
make an externally backed entry arrive at a new slot with a clear copy
bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable
ctx->data and BPF stores can modify the original page cache.
Keep sg.copy synchronized with sg.data[] whenever entries are
transferred, shifted, split, or copied into a new sk_msg. Clear the bit
when an entry is replaced by a newly allocated private page or freed.
This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(),
sk_msg_xfer(), and tls_split_open_record(), including the partial tail
entry created during TLS open-record splitting. |
| An incorrect permission assignment vulnerability in the WatchGuard Agent's log directory allows a local, authenticated non-administrative user to create, modify, append to, or delete the agent's log files and write other files into the directory. This allows an attacker to tamper with or destroy the agent's security logs and stage further local attacks by placing executable content in a directory owned by a privileged service. |
| Adm-zip before 0.6.1 contains an incorrect permission assignment vulnerability that allows attackers to set setuid, setgid, or sticky bits on extracted files when keepOriginalPermission is enabled. Attackers can craft zip external file attributes that pass unmasked into chmod, letting attacker-controlled executables gain elevated privileges when extracted as root and later run. |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Enterprise Infrastructure SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows unauthenticated attacker with logon to the infrastructure where JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of JD Edwards EnterpriseOne Tools. CVSS 3.1 Base Score 3.3 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:N/UI:R/S:U/C:N/I:N/A:L). |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, the app-data copy seeder uses shutil.copy() to copy cached package files into later environments, causing cached source modes to override the current run's umask. A cache populated under a permissive umask can therefore produce files writable by another local account in a later traversable environment, allowing package code such as pip/__init__.py to be modified and executed by the environment owner. The attacker cannot force the earlier umask, and a private destination parent prevents access. This issue is fixed in version 21.14.9. |
| Vulnerability in the JD Edwards EnterpriseOne Tools product of Oracle JD Edwards (component: Monitoring and Diagnostics SEC). Supported versions that are affected are 9.2.0.0-9.2.26.5. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where JD Edwards EnterpriseOne Tools executes to compromise JD Edwards EnterpriseOne Tools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all JD Edwards EnterpriseOne Tools accessible data. CVSS 3.1 Base Score 5.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Use the active VMCB's MSR bitmap when checking if MSR is intercepted
Use the MSR permission bitmap of the active VMCB instead of assuming that
KVM is always using vmcb02's bitmap when L2 is active, as KVM uses msrpm02
if and only if L1 wants to intercept MSR accesses, i.e. if and only if KVM
needs to merge msprm01 with msrpm12.
Don't bother tracking the virtual address of the bitmap that's being used,
as __va() is cheap on x86, and caching the virtual address would introduce
yet another source of potentially stale information. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: replace forgeable discard filler with a keyed sector marker
The discard-block check in dm_integrity_rw_tag() treats a stored tag
of all 0xf6 bytes (DISCARD_FILLER) as proof a block was discarded and
skips HMAC verification. allow_discards is only accepted in
dm-integrity's standalone mode. An attacker with raw write access to
the backing device, but without the integrity key, can stamp any block
with an all-0xf6 tag and have it served as authentic.
Add a new "allow_discards_keyed" target argument that marks discarded
blocks with a keyed checksum of (salt || sector) instead, computed by
integrity_discard_checksum(). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Check pointer type for all atomic RMW paths
Atomic RMW verification records an instruction pointer type only when the
current destination is PTR_TO_ARENA. A second path can therefore reach the
same instruction with an ordinary pointer without comparing it against the
saved arena type.
The post-verification fixup uses the saved type to rewrite the instruction
to BPF_PROBE_ATOMIC for every path. Record the actual destination type for
all atomic RMW paths so the existing mismatch check rejects incompatible
uses of one instruction. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix chown/chgrp with SMB3 POSIX Extensions
Ownership (chown) and group (chgrp) modifications were being ignored when
mounting with SMB3 POSIX Extensions unless CIFS_MOUNT_CIFS_ACL or
CIFS_MOUNT_MODE_FROM_SID were also explicitly set.
Fix this by checking for posix_extensions in cifs_setattr_nounix() when
updating UID and GID, ensuring that id_mode_to_cifs_acl() is called to map
and set the ownership/group information on the server. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject new transactions if the fs is fully read-only
[BUG]
There is a bug report where a heavily fuzzed fs is mounted with all
rescue mount options, which leads to the following warnings during
unmount:
BTRFS: Transaction aborted (error -22)
Modules linked in:
CPU: 0 UID: 0 PID: 9758 Comm: repro.out Not tainted
6.19.0-rc5-00002-gb71e635feefc #7 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:find_free_extent_update_loop fs/btrfs/extent-tree.c:4208 [inline]
RIP: 0010:find_free_extent+0x52f0/0x5d20 fs/btrfs/extent-tree.c:4611
Call Trace:
<TASK>
btrfs_reserve_extent+0x2cd/0x790 fs/btrfs/extent-tree.c:4705
btrfs_alloc_tree_block+0x1e1/0x10e0 fs/btrfs/extent-tree.c:5157
btrfs_force_cow_block+0x578/0x2410 fs/btrfs/ctree.c:517
btrfs_cow_block+0x3c4/0xa80 fs/btrfs/ctree.c:708
btrfs_search_slot+0xcad/0x2b50 fs/btrfs/ctree.c:2130
btrfs_truncate_inode_items+0x45d/0x2350 fs/btrfs/inode-item.c:499
btrfs_evict_inode+0x923/0xe70 fs/btrfs/inode.c:5628
evict+0x5f4/0xae0 fs/inode.c:837
__dentry_kill+0x209/0x660 fs/dcache.c:670
finish_dput+0xc9/0x480 fs/dcache.c:879
shrink_dcache_for_umount+0xa0/0x170 fs/dcache.c:1661
generic_shutdown_super+0x67/0x2c0 fs/super.c:621
kill_anon_super+0x3b/0x70 fs/super.c:1289
btrfs_kill_super+0x41/0x50 fs/btrfs/super.c:2127
deactivate_locked_super+0xbc/0x130 fs/super.c:474
cleanup_mnt+0x425/0x4c0 fs/namespace.c:1318
task_work_run+0x1d4/0x260 kernel/task_work.c:233
exit_task_work include/linux/task_work.h:40 [inline]
do_exit+0x694/0x22f0 kernel/exit.c:971
do_group_exit+0x21c/0x2d0 kernel/exit.c:1112
__do_sys_exit_group kernel/exit.c:1123 [inline]
__se_sys_exit_group kernel/exit.c:1121 [inline]
__x64_sys_exit_group+0x3f/0x40 kernel/exit.c:1121
x64_sys_call+0x2210/0x2210 arch/x86/include/generated/asm/syscalls_64.h:232
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xe8/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x44f639
Code: Unable to access opcode bytes at 0x44f60f.
RSP: 002b:00007ffc15c4e088 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7
RAX: ffffffffffffffda RBX: 00000000004c32f0 RCX: 000000000044f639
RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000001
RBP: 0000000000000001 R08: ffffffffffffffc0 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004c32f0
R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000001
</TASK>
Since rescue mount options will mark the full fs read-only, there should
be no new transaction triggered.
But during unmount we will evict all inodes, which can trigger a new
transaction, and triggers warnings on a heavily corrupted fs.
[CAUSE]
Btrfs allows new transaction even on a read-only fs, this is to allow
log replay happen even on read-only mounts, just like what ext4/xfs do.
However with rescue mount options, the fs is fully read-only and cannot
be remounted read-write, thus in that case we should also reject any new
transactions.
[FIX]
If we find the fs has rescue mount options, we should treat the fs as
error, so that no new transaction can be started. |
| Vulnerability in the Oracle Solaris product of Oracle Systems (component: Utility). The supported version that is affected is 11.4. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Solaris executes to compromise Oracle Solaris. Successful attacks of this vulnerability can result in takeover of Oracle Solaris. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise HCM Human Resources product of Oracle PeopleSoft (component: Administer Workforce). The supported version that is affected is 9.2. Difficult to exploit vulnerability allows high privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise HCM Human Resources. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all PeopleSoft Enterprise HCM Human Resources accessible data as well as unauthorized read access to a subset of PeopleSoft Enterprise HCM Human Resources accessible data and unauthorized ability to cause a hang or frequently repeatable crash (complete DOS) of PeopleSoft Enterprise HCM Human Resources. CVSS 3.1 Base Score 6.0 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:H/UI:R/S:U/C:L/I:H/A:H). |
| Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: SQR). Supported versions that are affected are 8.61-8.63. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all PeopleSoft Enterprise PeopleTools accessible data. CVSS 3.1 Base Score 6.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:N/A:N). |
| Vulnerability in Oracle Autonomous Health Framework (component: Trace File Analyzer). Supported versions that are affected are 26.3-26.8. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Autonomous Health Framework executes to compromise Oracle Autonomous Health Framework. Successful attacks of this vulnerability can result in takeover of Oracle Autonomous Health Framework. CVSS 3.1 Base Score 7.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). |
