| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Snipe-IT versions before 8.7.0 wipe the database before validating the uploaded backup archive in the restore endpoint. Superusers uploading corrupted or invalid zip files trigger permanent data loss with no recovery path or rollback mechanism. |
| Snipe-IT 8.5.0 through 8.6.3 contains an open redirect vulnerability in its SAML assertion-consumer endpoint (SamlController::acs, POST /saml/acs). The endpoint wrote the RelayState POST parameter directly into Laravel's url.intended session key with only CR/LF characters stripped, and LoginController later issued redirect()->intended(), which passes an absolute URL through to the Location header unchanged. An unauthenticated attacker who induces a user of a SAML-SSO-enabled instance to visit a crafted IdP-initiated SSO link can therefore cause the victim's browser to be redirected to an arbitrary absolute external URL immediately after a successful authentication, which the advisory notes facilitates credential-harvesting phishing. No account on the target instance and no compromise of the identity provider are required. Only deployments with SAML SSO enabled are affected. Fixed in 8.7.0 (commit d30b73d, PR #19386), which validates RelayState via a new Helper::sameOriginUrl check before storing it. |
| snipe-it versions before 8.7.0 fail to enforce per-instance FMCS scoping in asset audit endpoints, relying solely on query-layer filtering instead of policy-layer authorization checks. Attackers with valid sessions and assets.audit permissions could write audit log entries against cross-company assets if the query-layer scope were bypassed or refactored. |
| snipe-it versions before 8.7.0 contain an authorization bypass vulnerability in location print endpoints that fails to enforce per-model authorization checks. Authenticated attackers with location view permission can access printassigned and printallassigned endpoints to retrieve related users, assets, accessories, consumables, and components regardless of their individual model permissions. |
| Snipe-IT versions >= 7.0.12 and <= 8.6.3 contain an authorization bypass in the Livewire importer component (App\Livewire\Importer, mounted at the imports.index route). The component only checked the broad 'import' ability at mount time, while its files() and activeFile() computed properties queried the imports table with no owner or company scope. As a result, any authenticated non-superuser holding the import permission could view every Import record on the instance (original filename, file_path, filesize, import_type and creation timestamp) and could invoke the selectFile($id) Livewire action with any auto-incrementing Import ID to load another user's record, exposing its stored preview data (header_row column headers and first_row, the first data row of the CSV). Because import CSVs commonly contain personal data, asset serial numbers and license keys, this discloses sensitive information; in Full Multiple Companies Support (FMCS) deployments the disclosure also crosses company/tenant boundaries. Impact is limited to preview data rather than the full CSV file, and superusers were unaffected. Fixed in version 8.7.0, which scopes non-superuser reads to imports owned by the caller. |
| Snipe-IT versions up to and including 8.6.3 contain a race condition (TOCTOU) in the consumable checkout API endpoint (POST /api/v1/consumables/{consumable_id}/checkout). The requested quantity is validated against the number of remaining units before the database transaction begins, and the transaction then creates the checkout records without locking the consumable row or re-checking availability. An authenticated user with permission to check out consumables can submit concurrent checkout requests for the same consumable so that both requests pass the availability check and succeed, over-allocating stock and driving the remaining inventory negative (e.g., a consumable with 1 remaining unit ends at -1 after two concurrent 1-unit checkouts). The issue is fixed in 8.7.0, which re-fetches the parent row under lockForUpdate inside the transaction and re-validates availability. |
| Snipe-IT versions before 8.7.0 fail to apply company scope filtering to the GET /hardware/requested endpoint when Full Multiple Company Support is enabled, allowing authenticated users with assets.view permission to read pending asset requests from all companies. Attackers can retrieve cross-tenant data including requested asset names, requester display names and profile links, locations, and expected check-in dates without parameter manipulation. |
| Snipe-IT versions before 8.7.0 fail to HTML-escape the employee_num field in the acceptance PDF generator, allowing attackers with users.edit permission to inject img tags into TCPDF's writeHTML() function. Attackers can craft a malicious employee_num value containing an img tag with an arbitrary HTTP(S) URL to trigger server-side requests to internal services, cloud metadata endpoints, or external targets when a victim signs an asset acceptance. |
| Snipe-IT versions before 8.7.0 contain a stored cross-site scripting vulnerability in DepartmentPresenter::formattedNameLink() where department names are rendered unescaped in the fallback branch for users without departments.view permission. Users with departments.edit permission can inject malicious scripts into department names that execute in the browsers of all department members when they load their My Assets page. |
| Snipe-IT through version 8.6.3 fails to perform object-level authorization in the updateLicense, updateConsumable, updateAccessory, and updateModel endpoints and in the storeModel endpoint for Predefined Kits. The existing check authorizes only the parent Predefined Kit (update on PredefinedKit) and not the child object being attached. As a result, an authenticated user holding only the kits.edit permission can attach a License, Consumable, Accessory, or Asset Model that they are otherwise denied (HTTP 403) from reading directly to a Predefined Kit, and the kit relation index then discloses the attached object's name back to that low-privilege user. This is the update-path and storeModel counterpart to CVE-2026-55478, which fixed only the storeLicense, storeConsumable, and storeAccessory methods in 8.6.2. Note that updateModel was code-vulnerable in 8.6.3 but not reachable in practice because a route-name typo bound the route to a nonexistent controller method, causing HTTP 500 responses. The issue is fixed in Snipe-IT 8.7.0. |
| Snipe-IT before 8.7.1 fails to validate the length of the note field in the POST /account/accept/{acceptance} endpoint, allowing authenticated users to submit unbounded input that reaches synchronous CommonMark rendering. Attackers can submit large note values to exhaust PHP worker CPU and cause denial of service through resource exhaustion in the markdown parsing pipeline. |
| Snipe-IT before 8.7.0 fails to properly gate Laravel Passport's OAuth client management routes, allowing any authenticated user to register OAuth clients with attacker-controlled redirect URIs. Attackers can trick administrators into approving consent screens, then exchange authorization codes for bearer tokens inheriting full admin API permissions lasting up to 40 years. |
| Snipe-IT versions 4.2.0 through 8.6.3 expose Laravel Passport's auto-registered personal-access-token routes (GET, POST, DELETE /oauth/personal-access-tokens*) with only 'web' and 'auth:web' middleware, without the self.api permission gate that Snipe-IT enforces on its own token endpoints (/account/api and /api/v1/account/personal-access-tokens). Any user with a valid web session and the corresponding CSRF token can POST to /oauth/personal-access-tokens and mint a long-lived bearer token for their own account, even when an administrator has denied the self.api permission. The issued token is still subject to existing per-endpoint authorization policies, so this is not a privilege escalation; it defeats the administrative control intended to block API/scripted access at the user's own permission level. Fixed in 8.7.0 (commit 3f74b8c), which registers overriding routes wrapped in the can:self.api middleware. |
| Snipe-IT versions before 8.7.0 contain a CSS injection vulnerability in the Custom CSS field due to incomplete sanitization that reverses HTML encoding on greater-than and double-quote characters. Superusers can plant malicious CSS payloads using @import and url() references to exfiltrate CSRF tokens from other superusers via attribute-selector rules, enabling account takeover. |
| snipe-it versions before 8.7.0 contain a server-side request forgery vulnerability in the ExternalUrl validation rule that fails to detect IPv6 transition addresses encoding private IPv4 targets. Attackers with super-admin privileges can configure webhook URLs using NAT64, 6to4, or Teredo transition addresses to bypass SSRF guards and access internal services or cloud metadata endpoints. |
| Snipe-IT before 8.7.0 streams the SQL entry from an uploaded backup archive directly into the MySQL/MariaDB command-line client (`mysql`) without the --binary-mode flag, so the client interprets lines beginning with backslash commands such as `\!` as local shell commands. An authenticated superadministrator who uploads a crafted ZIP backup (POST /admin/backups/upload) and triggers a restore (POST /admin/backups/restore/{filename}) without the optional `clean` sanitizer parameter — which is not applied by default because DB_SANITIZE_BY_DEFAULT is false — can execute arbitrary OS commands as the web application's operating-system user, exposing application secrets (including database credentials and APP_KEY) and allowing modification of application-writable files and data. Version 8.7.0 adds the --binary-mode flag to the client invocation. |
| Snipe-IT versions before 8.6.2 contain an authorization bypass vulnerability in checkout-acceptance report actions when Full Multiple Company Support is enabled. Authenticated users with reports.view permission can enumerate sequential acceptance IDs and soft-delete or trigger reminder emails for acceptances belonging to other companies by exploiting a null check on the legacy users.company_id column. |
| Snipe-IT before 8.7.0 gates the bulk asset restore endpoint on the assets.edit permission instead of assets.delete, allowing users without delete rights to restore soft-deleted assets. Attackers with edit permissions can post asset identifiers to the bulk restore endpoint to undo administrator deletions and bypass intended permission separation. |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.2, a stored manufacturer or supplier name passed as the table component $name becomes data-selected-count-id in resources/views/partials/bootstrap-table.blade.php. Client-side code reads the browser-decoded countId, uses it as a selector, concatenates countId.substring(1) into an HTML string, and passes the string to jQuery .after(). A crafted name can therefore execute JavaScript when an authenticated user views the manufacturer detail page or supplier detail page, potentially exposing data or actions available to that session. This issue is fixed in version 8.6.2. |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.0, an authenticated user with users.create permission can submit the admin permission while creating a user because store() in app/Http/Controllers/Users/UsersController.php strips superuser permission but does not strip admin permission. The created account can obtain administrative privileges. This issue is fixed in version 8.6.0. |
